|
|
| Model | |
Application |
|
| ||
|
| |||
Model | Steel 3V Blades | |||
The | UL555 11/2 Hour Fire Resistance Rating | |||
(4 in. wg.) for operation and dynamic closure in emergency fire | ||||
4 hour Fire Resistance Rating (BS476) | ||||
situations. Model | ||||
running horizontal) or horizontally and is rated for airflow in either | Model | |||
direction. |
| accordance with fire damper requirements | ||
Model | established by: | |||
| ||||
4 hours at Warrrington Fire, UK, and is approved for fire partitions of 4 | National Fire Protection Association | |||
hours or less where British Standards are required. | NFPA Standards 80, 90A & 101 | |||
Ratings |
| ICBO Uniform Building Codes | ||
UL 555 Fire Resistance Rating | 11⁄2 Hours | IBC International Building Codes | ||
Fire Rating: | ||||
SBCCI Standard Building Codes | ||||
Dynamic Closure Rating: Actual limits are size dependent | ||||
| ||||
Maximum Velocity: | 10.2 m/s (2000 fpm) | British Standard BS476 | ||
Maximum Pressure: | 1 kPa (4 in. wg) | Tested to 4 hours at Warrington Fire, UK | ||
|
|
| ||
BS476 Fire Resistance Rating | 4 hours |
| ||
Fire Rating: |
|
Standard Construction
Frame: | 127mm x 25 mm (5 in. x 1 in.) 1.5mm |
| (16 gauge) galvanized steel hat |
| channel with reinforced corners. A |
| low profile head and sill are used on |
| sizes less than 432mm (17 in.) high to |
| maximize free area and performance. |
Blades: | 1.5mm (16 gauge) galvanized steel, |
| reinforced with 3 longitudinal |
| structurally designed vee’s. |
Seals: | Flexible stainless steel jamb seals. |
Linkage: | Concealed in jamb. |
Fusible Link: | UL listed 74ºC (165°F) |
Axles: | 13mm (1⁄2 in.) dia. plated steel. |
Bearings: | Bronze sleeve type. |
Actuator: | Manual quadrant. |
“UL CLASSIFIED (see complete marking on product)”
“UL CLASSIFIED to Canadian safety standards (see complete marking on product)”
Standard 555 (Listing #R13317)
Greenheck Kunshan Co. Ltd. and Greenheck Fan Corporation certifies that the model
RAMCA Certified Ratings Seal applies to air
performance ratings only.
Size Limitations
Minimum Size: | 203mm W x 152mm H |
|
|
|
|
|
|
Maximum Size: | (8 in. W x 6 in. H) |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Single Section: | 914mm W x 914mm H |
|
|
|
|
|
|
| (36 in. W x 36 in. H) or |
|
|
|
|
|
|
| 813mm W x 1270mm H |
|
|
| |||
|
| W | |||||
| (32 in. W x 50 in. H) |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Multi Section: | 1626mm W x 1270mm H |
|
|
|
|
|
|
| (64 in. W x 50 in. H) |
|
|
|
|
|
|
Optional Features |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
•100ºC (212°F), 141ºC (286°F), and 177ºC (350°F) fusible links (UL only) |
|
|
|
|
| RH | |
• 69°C (155°F) fusible links (BS476) |
|
|
|
|
| ||
|
|
|
|
|
| ||
• Factory mounted sleeves |
|
|
|
|
|
|
|
|
|
|
| H |
| ||
• Retaining angles |
| LH |
|
|
| ||
|
|
|
|
|
| ||
• Sleeve with integral flange on both sides |
|
|
|
|
| ||
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
* W & H dimensions furnished approximately 6mm (1/4 in.) undersize. (Add sleeve thickness for overall sleeved damper dimension)