Extruded BACKDRAFT DAMPER
DAMPERS AND LOUVERS
ES-30 SERIES
Vertical Mount - Horizontal Airflow
Application and Design
The
Ratings (See page 2 for specific limitations)
Pressure: | 2.5 in. wg (622 Pa) - differential pressure. |
|
Velocity: | 2000 fpm (10.2 m/s) |
|
Temperature: | 180°F (82ºC) | H* |
Standard Construction
Frame: 6063T5 extruded aluminum. (0.063 in. [1.6mm] thickness)
Blades: 6063T5 extruded aluminum. (0.050 in. [1.3mm] thickness)
Axle Bearings: Synthetic polycarbonate sleeve type. Linkage: 1/8 in. (3mm) aluminum.
Blade Seals: Vinyl.
Size Limitations
Minimum Size (without weights): 4 in.W x 4 in. H (102mm x 102mm)
Minimum Size (with weights): 6 in. W x 8 in. H (152mm x 203mm)
Maximum Size: 40 in. W x 52 in. H (1016mm x 1321mm)
W*
*W & H dimensions furnished approximately 1/4 in. (6mm) under size.
NOTE: Optional counterbalance weights shown.
3"
3" | 2" Max. | 3" | 2" Max. | 3" | 2" Max. |
Options and Accessories
•11/2 in. (38mm) Flange On Discharge:
• 11/2 in. (38mm) Flange On Intake: | 2" | 1 1/2" 2" | 2" 1 1/2" | |
• Counterbalance Weights |
|
|
|
|
• Pull Chain Actuator |
| |||
• Wing Nut Actuator |
| |||
| No Flange | Flange On Discharge | Flange On Intake | |
|
|
No Flange | Flange on Discharge | Flange on Intake |
Note: Counterbalance weights may require field adjustment. Instructions are available at www.greenheck.com.