![FSDR-512](/images/new-backgrounds/67521/675211x1.webp)
FSDR-512
Application
Model
Ratings
UL 555 Fire Resistance Rating
Fire Rating: 1 1/2 Hour
Dynamic Closure Rating: Actual ratings are size dependant Maximum Velocity: 3000 fpm (15.2 m/s)
Maximum Pressure: 4 in. wg (1 kPa)
UL 555S Leakage Rating
Leakage Class: II
Operational Rating: Actual ratings are actuator dependant
Maximum Velocity: 3000 fpm (15.2 m/s) Maximum Pressure: 4 in. wg (1 kPa)
Maximum Temperature: 350º F (177°C)
Standard Construction
Frame/Sleeve: 20 ga. (1mm) galvanized steel round Blade: Double skin galvanized steel (14 ga.
[2mm] equivalent) round style blades
Seal: Extruded silicone rubber blade seals
Axle: 1/2 in. (13mm) dia. plated steel Bearing: Stainless steel sleeve type
Fusible Link: UL listed 165ºF (74ºC)
Combination Fire Smoke Damper
Round Steel Blade
UL 555S Leakage Class II
UL555 1 1/2 Hour Fire Resistance Rating
Model
National Fire Protection Association
NFPA Standards 80, 90A, 92A, 92B, 101 & 105
IBC International Building Codes
New York City (MEA listing
California State Fire Marshall
Listing #:
Listing #:
“UL CLASSIFIED (see complete marking on product)”
“UL CLASSIFIED to Canadian safety standards (see complete marking on product)”
Standard 555 (Listing #R13317)
Standard 555S (Listing #R13447)
Size Limitations
Minimum Size: 6 in. (152mm) diameter
Maximum Size: 24 in. (610mm) diameter
Optional Features
•OCI (Open closed indication switches)
•165º F (74°C), 212º F (100°C), and 350º F (177°C) RRL available
•TOR (remote override of 165º F (74°C) closure allows damper to
perform smoke management functions during a fire emergency)
• Electric or pneumatic actuators to accomplish smoke management
and system functions.
• One retainer plate required, additional retainer plate available. | * Dimensions furnished approximately 1/8 in. (3mm) undersize. |
• 14 ga. (2mm) or 16 ga. (1.5mm) frame/sleeve
Installation instructions available at www.greenheck.com.
Opening + 2 in. Min.
Nut
Minimum Wall/Floor Opening | Clamping | Retaining | |
Screw | |||
= Nominal Dia. + 7/8 in. | |||
| Plate Assembly | ||
|
| ||
1.00 in. Min. Typ. |
| Clamping Screw | |
| Fasteners |