Application Data
Damper Sideplate and Sleeve Dimensional Data
The drawings below illustrate the factory standard sideplate and sleeve mountings for the
If space constraints are a problem the "A" dimension can be varied between 53/8 in. (136mm) and 12 in. (305mm).
|
|
|
|
|
|
| Sleeve | 11/2" max | |
|
|
|
|
|
|
|
|
| |
Sideplate |
|
| "A" Dimension |
|
|
|
| ||
|
|
|
|
|
|
|
| ||
|
| in. (mm) |
| Sleeve | Sideplate |
|
| ||
|
|
|
| Standard | Maximum |
|
| ||
|
|
|
|
|
|
|
| ||
|
| All Dampers* | 7 3/16 (183) | 12 (305) | 6 3/16 (157) | 33/4" |
| ||
|
| When height is | 11 3/16 | 12 | 10 3/16 |
| |||
|
|
|
| ||||||
|
| 11 in. (279) or | (284) | (305) | (259) |
|
|
| |
| 152mm. | less with OCI |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
| *With the exception of dampers 11 in. (279mm) high or less (12 in. |
|
|
| ||||
|
| (305mm)high or less if | width is greater than 64 in. (1625mm)) with OCI | Varies |
|
| |||
|
| option. |
|
|
|
| 53/8" |
| |
|
|
|
|
|
|
|
| ||
|
| ** On dampers 11 in. (279mm) high or less (12 in. (305mm)high or less if |
|
| |||||
| 127.mm | width is greater than 64 in. (1625mm)) with OCI option, sideplate is 16 in. |
|
| |||||
| (406mm) |
|
|
|
|
|
|
| |
A |
|
|
|
|
| A |
| 5" | |
* |
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| |
| 305mm |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Sleeve Length | |
|
| T* |
|
| Space Envelopes Required for Actuators | ||||
| S |
|
|
| |||||
|
|
|
| and Accessories |
|
| |||
|
|
|
|
|
|
| |||
|
|
|
|
| Externally mounted actuators always require space | ||||
|
|
|
|
| outside of the damper sideplate or sleeve. The “S” dimen- | ||||
|
|
|
|
| sion illustrates the clearance required for various available | ||||
|
|
|
|
| actuators. |
|
|
|
|
|
|
|
|
| On dampers less than 18 in. (457mm) high, actuators may | ||||
|
|
|
|
| also require clearances above and/or below the sideplate | ||||
|
|
|
|
| or sleeve. “B” and “T” dimensions are worst case clear- | ||||
|
|
|
|
| ance requirements for some dampers less than 18 in. | ||||
|
|
|
|
| (457mm) high. All damper sizes under 18 in. (457mm) high | ||||
|
|
|
|
| do not require these worst case clearances. If space avail- | ||||
|
|
|
|
| ability above or below the damper sleeve is limited, each | ||||
|
|
|
|
| damper size should be individually evaluated. |
| |||
|
| B* |
|
|
|
|
|
|
|
| Actuator |
| B* | T* |
| S |
|
| |
| Type/Model | With OCI | With OCI |
|
|
| |||
|
|
|
|
|
| ||||
|
|
|
| 120 Volt AC |
|
|
|
| |
ML4XXX Series Honeywell | 5 1/4 in. (133mm) | 3/4 in. (19mm) | 6 in. (152mm) |
|
| ||||
MS4XXX Series Honeywell | 6 in. (152mm) | 3/8 in. (10mm) | 6 in. (152mm) |
|
| ||||
MS4120 Series Honeywell | 6 in. (152mm) | 3/8 in. (10mm) | 6 in. (152mm) |
|
| ||||
|
|
|
| 24 Volt AC |
|
|
|
|
|
ML8XXX Series Honeywell | 5 1/4 in. (133mm) | 3/4 in. (19mm) | 6 in. (152mm) |
|
| ||||
MS8XXX Series Honeywell | 6 in. (152mm) | 3/8 in. (10mm) | 6 in. (152mm) |
|
| ||||
MS8120 Series Honeywell | 6 in. (152mm) | 3/8 in. (10mm) | 6 in. (152mm) |
|
| ||||
|
|
|
| Pneumatic (psi) |
|
|
|
| |
| 1 in. (25mm) | 6 1/4 in. (159mm) | 6 1/2 in. (165mm) |
|
| ||||
| 2 3/8 in. (60mm) | 12 1/8 in. (308mm) | 9 1/4 in. (235mm) |
|
| ||||
3 3/4 in. (95mm) | 16 1/2 in. (419mm) | 10 in. (254mm) |
|
| |||||
* For dampers 18 in. (457mm) or more in height these dimensions are 0 in. .
