Application Data
Damper Sideplate and Sleeve Dimensional Data
The drawings below illustrate the factory standard sideplate and sleeve mountings for the
If space constraints are a problem the "A" dimension can be varied between 53/8 in. (136mm) and 12 in. (305mm).
|
|
|
|
| Sleeve | |
Sideplate |
|
|
|
|
| 11/2" max. |
|
| "A" Dimension |
|
|
| |
|
|
|
|
|
| |
| in. (mm) | Sleeve | Sideplate |
|
| |
|
| Standard | Maximum |
|
| |
|
|
|
|
| ||
| All Dampers* | 7 3/16 (183) | 12 (305) | 6 3/16 (157) |
| 33/4" |
|
|
|
|
|
| |
| When height is | 11 3/16 | 12 | 10 3/16 |
|
|
| 11 in. (279) or | (284) | (305) | (259) |
|
|
6 in. | less with OCI |
|
|
|
|
|
|
|
|
|
|
| |
| *With the exception of dampers 11 in. (279mm) high or less (12 in. | Varies |
| |||
| (305mm)high or less if | width is greater than 64 in. (1625mm)) with OCI | 53/8" | |||
| option. |
|
|
|
| |
|
|
|
|
|
| |
| ** On dampers 11 in. (279mm) high or less (12 in. (305mm)high or less if |
|
| |||
5 in. | width is greater than 64 in. (1625mm)) with OCI option, sideplate is 16 in. |
|
| |||
(406mm) |
|
|
|
|
| |
A 12 in.** |
|
|
| A | 5" | |
|
|
|
| |||
|
|
|
|
| Sleeve Length | |
|
|
|
|
|
| |
T* | Space Envelopes Required for Actuators |
S | and Accessories |
| Externally mounted actuators always require space |
| outside of the damper sideplate or sleeve. The “S” dimen- |
| sion illustrates the clearance required for various available |
| actuators. |
| On dampers less than 18 in. (457mm) high, actuators may |
| also require clearances above and/or below the sideplate |
| or sleeve. “B” and “T” dimensions are worst case clear- |
| ance requirements for some dampers less than 18 in. |
| (457mm) high. All damper sizes under 18 in. (457mm) high |
| do not require these worst case clearances. If space avail- |
| ability above or below the damper sleeve is limited, each |
| damper size should be individually evaluated. |
B* |
|
| B* | T* |
| |
Actuator Type/Model |
|
| S | |
With OCI, RRL, | With OCI, RRL, | |||
| or TOR | or TOR |
| |
|
|
|
| |
| 24 Volt AC |
| ||
MS7520A2015/B | 6 in. (152mm) | 3/8 in. (10mm) | 6 in. (152mm) | |
MS7520A2213/B | ||||
|
|
| ||
|
|
|
| |
* For dampers 18 in. (457mm) or more in height these dimensions are 0 in.
