®

DELUXE INLINE FAN

Dimensional Data

Model

 

A

B

C

D

E

F

G

Wt.

 

 

 

 

 

 

 

 

 

 

110, 150,

200

137/8

111/2

715/16

6

11/4

101/4

31/4

101/4

Outlet connection width is 1 inch - Mounting bracket width is 1½ inch For complete dimensional information, see CAPS submittal drawings. All dimensions are in inches.

Performance Data

CSP B

D dia.

Inlet

F x G

C

E

BA

Model

RPM

AMPS

Watts

 

 

CFM/Static Pressure in inches of WG

 

 

 

 

 

 

 

 

 

 

 

 

0.000

0.100

0.125

0.250

0.375

0.500

0.625

0.750

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4,6

 

 

 

CFM

103

100

99

98

97

96

93

86

CSP-B110

950

1.14

80

 

 

 

 

 

 

 

 

 

Sones

2.0

2.0

2.1

2.3

2.6

2.7

3.1

3.3

 

 

 

 

4,6

 

 

 

CFM

151

149

149

148

147

145

142

134

CSP-B150

1050

1.70

129

Sones

2.5

2.7

2.7

2.9

3.1

3.4

3.6

3.9

 

 

 

 

4,6

 

 

 

CFM

186

184

183

182

180

178

175

169

CSP-B200

1100

2.20

173

 

 

 

 

 

 

 

 

 

Sones

3.4

3.6

3.7

4.0

4.1

4.1

4.3

4.5

 

 

 

 

4 Units available with 50 Hz motors (See CAPS for performance)

6 Available with 277 volt motor.

 

 

 

Performance certified is for Model CSP inline for installation type D: Ducted inlet, Ducted outlet. Performance ratings include the effects of a backdraft damper. Speed (RPM) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in fan sones at 5 ft. (1.5m) from the test inlet duct in a hemispherical free field calculated per AMCA Standard 301. Values are for installation type D: Ducted inlet fan sone levels. Ratings do not include the effects of duct end correction. Ratings are based on 10 ft. of insulated duct. The AMCA Certified Ratings Seal applies to air performance only.

Model SP-C50

Typical Specifications

Ceiling mounted exhaust fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of steel. The plastic duct collar shall be a tapered sleeve for ease of connection to 3 and 4 inch round ductwork and shall include a backdraft damper. The grille shall be constructed of non-yellowing high impact polystyrene and attached to the housing with torsion springs.

The wheels shall be constructed of high strength polymer. The access for wiring shall be external. The motor disconnect shall be internal and of the plug in type. All fans shall bear the AMCA Certified Ratings Seal for sound and air performance. Model SP-C50 shall be UL Listed. Fans shall be Model SP-C50 as supplied by Greenheck Fan Corporation, Schofield, Wisconsin.

Models SP-B50, B70, B80, B90, B110, B150, and B200

Ceiling mounted exhaust fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of steel. The steel duct collar shall be 4 inch in diameter on the B50, B70, and B80 and 6 inch in diameter on the B90, B150, and B200 to accept 4 inch and 6 inch round ductwork and shall include a backdraft damper. The designer grille shall be constructed of non-yellowing high impact polystyrene and attached to the housing with hidden attachment screws. The access for wiring shall be external. The motor disconnect shall be internal and of the plug in type.

The motor shall be mounted on vibration isolators. The fan wheel shall be of the forward curved centrifugal type, constructed of calcium carbonate filled polypropylene and dynamically balanced. All fans shall bear the AMCA Certified Ratings Seal for sound and air performance and shall be UL/cUL Listed. Ceiling or wall mount fans shall be Model SP-B50, B70, B80, B90, B110, B150 or B200 as manufactured by Greenheck Fan Corporation, Schofield, Wisconsin.

Models SP-A50 thru A1550

Ceiling mounted exhaust fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of heavy gauge galvanized steel. The housing interior shall be lined with 1/2 inch acoustical insulation. The outlet duct collar shall include an aluminum backdraft damper on all SP-A sizes and shall be spring loaded on size SP-A110 and larger. Outlet shall be adaptable for horizontal or vertical discharge. The designer grille for sizes SP-A50 through SP-A390 shall be constructed of high impact polystyrene and for sizes SP-A410 through SP-A1550, the grille shall be constructed of aluminum. Grilles shall be non-yellowing.

The access for wiring shall be external. The motor disconnect shall be internal and of the plug in type. The motor shall be mounted on vibration isolators. The fan wheel(s) shall be of the forward curved centrifugal type and dynamically balanced. All fans shall bear the AMCA Certified Ratings Seal for sound and air performance and shall be UL/cUL Listed. Ceiling or wall mount fans shall be Model SP as manufactured by Greenheck Fan Corporation, Schofield, Wisconsin.

Models CSP-B110, B150, and B200

Duct mounted exhaust, supply or return air fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of steel. The steel duct collar shall be 6 inch in diameter to accept 6 inch round ductwork and shall include a backdraft damper. The access for wiring shall be external. The motor disconnect shall be internal and of the plug in type.

The motor shall mounted on vibration isolators. The fan Wheel shall be of the forward curved centrifugal type, constructed of calcium carbonate filled polypropylene and dynamically balanced. All fans shall bear the AMCA Certified Ratings Seal for air performance and shall be UL/cUL Listed. Ceiling or wall mount fans shall be Model CSP-B110, B150 or B200 as manufactured by Greenheck Fan Corporation, Schofield, Wisconsin.

Models CSP-A110 thru A3600

Duct mounted exhaust, supply or return air fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of heavy gauge galvanized steel. The housing interior shall be lined with 1/2 inch acoustical insulation. The outlet duct collar shall include an aluminum backdraft damper and shall be adaptable for horizontal or vertical discharge. The access for wiring shall be external. The motor disconnect shall be internal and of the plug in type.

The motor shall be mounted on vibration isolators. The fan wheel(s) shall be of the forward curved centrifugal type and dynamically balanced. All fans shall bear the AMCA Certified Ratings Seal for air performance and shall be UL/cUL Listed. Ceiling or wall mount fans shall be Model CSP as manufactured by Greenheck Fan Corporation, Schofield, Wisconsin.

19

Page 19
Image 19
Greenheck Fan manual 137/8 111/2 715/16, 101/4 31/4, CSP-B110, 151, CSP-B150, CSP-B200

CSP, SP specifications

Greenheck Fan Corporation is a leader in the manufacturing of air movement and control equipment, and its SP and CSP series of fans are notable contributions to the realm of ventilation technology. Designed for a variety of applications including commercial, institutional, and industrial settings, these fans provide enhanced performance, energy efficiency, and reliability.

One of the main features of the Greenheck SP and CSP series is their robust construction. These fans are built with high-quality materials that ensure durability and longevity, even in demanding environments. The SP model is belt-driven, allowing for higher efficiency and variable speed options, which can adapt to the unique requirements of each application. This flexibility is crucial for ensuring optimal air performance while minimizing energy consumption, making it an environmentally friendly choice.

In contrast, the CSP fan features a direct drive configuration, enhancing its efficiency and reducing maintenance needs. This design trend reflects an industry-wide push towards simpler, yet more effective technological solutions that reduce the total cost of ownership for end users. The direct drive and labyrinth seals help provide quieter operation, a critical feature for settings such as schools, hospitals, and office buildings, where noise reduction is a priority.

Additionally, the fans in both series have been engineered with advanced aerodynamic designs that maximize airflow while minimizing turbulence. This is particularly beneficial in heavy-duty applications, offering improved performance in terms of both static pressure and airflow efficiency. The innovative impeller design optimizes performance across a range of operating conditions, ensuring reliable operation.

Comfort and convenience are also accounted for in the Greenheck SP and CSP series. These fans come equipped with various control options, including integrated controls that facilitate easy adjustments to fan speed and airflow. This adaptability is key for systems requiring precise air handling based on load changes.

Moreover, these fans comply with industry standards for energy efficiency, including ASHRAE regulations, ensuring they meet or exceed the expected benchmarks for sustainability. This commitment to energy-efficient solutions helps customers reduce their operational costs and environmental footprints.

In summary, the Greenheck Fan SP and CSP models represent a significant leap forward in ventilation technology, characterized by their robust design, energy efficiency, and advanced features. Whether for a commercial kitchen, an expansive warehouse, or an educational institution, these fans provide reliable and effective air management solutions tailored to meet the needs of modern facilities.