![WD-400/410 SELECTION](/images/new-backgrounds/67440/674405x1.webp)
WD-400/410 SELECTION
•Multiple section dampers shown below are supplied as equal size sections. Any damper that has multiple sections, both vertically and horizontally, will require field assembly and will require additional reinforcement (not supplied by Greenheck) to support the assembly. These larger dampers must have the additional reinforcement to give them structural stability.
•Please note that the width dimension is always taken as being parallel to the length of the blades.
Height
8
74
|
|
|
| Width |
|
|
|
|
8 | 32 | 50 | 64 |
| 100 | 128 | 150 | |
8 Up | 32 Up | Above 50 | 64 Up | Above 100 |
| 128 Up |
| |
To 32 | Thru 50 | Up To 64 |
| Thru 100 | Up To 128 |
| To 150 |
Single | Double | Single | Double | Single | Double |
Panel | Panel | Panel | Panel | Panel | Panel |
One | One | Two | Two | Four | Three |
Section | Section | Section | Section | Section | Section |
8 Up To 74
Single | Double | Single | Double | Single | Double |
Panel | Panel | Panel | Panel | Panel | Panel |
Two | Two | Four | Four | Eight | Six |
Section | Section | Section | Section | Section | Section |
74 Up To 148
148
Note: A 26 in. x 26 in. and a 30 in. x 30 in.
*Width and height given in inches.
3