![GET READY TO START](/images/new-backgrounds/54456/544565x1.webp)
GET READY TO START
Before assembly, use scissors to unwrap the parts from the packaging. DO NOT use a box cutter or
Step 1
Locate the hearth and place it on the floor. Do not put it up against the wall at this point in the assembly as you need to get in behind the mantel to insert several screws.
Step 2
Locate the left and right bottom plates. Standing in front of the hearth, place them with the finished side up on
the left and right sides of the left and right side storage compartments.
Step 3
Locate the left inside and left outside wall panels, the back
panel and the top panel for the left wine bottle storage compartment.
Position both the inside and outside wall panels, position the back panel (finished side inside the compartment) by inserting the panel in the groove of one side, then squeezing the sides together ensuring that the back panel stays in position within the grooves of both side panels. Get your helper to hold the panels snuggly in place while you insert the 6 screws which will hold the sides and back in position.