Grex Power Tools X1000 manual Troubleshooting Guide, Technical Specifications, Warranty

TROUBLESHOOTING GUIDE

No.	Part No.	Part Description
1	X1000NCS	Air Nozzle Cap Set
1-1	A150027	Brass Ring
1-2	A041000	Air Nozzle
1-3	A120006	Teflon Ring
2	A051000	Fluid Nozzle
3	A021000	Fluid Needle
3-1	A150028	Fluid Needle Seat

4A120008 Needle Packing

5A150029 Needle Packing Seat

6	X1000ACA	Fan Air Control Assembly
6-1	A150030	Air Piston
6-2	A150031	E-Ring
6-3	A150032	Air Control Seat
6-4	A120009	Teflon O-Ring
6-5	A150033	Air Control Knob

7A011000 Spray Gun Body

8A110006 Fluid Needle Spring

9A150034 Fluid Adjust Knob

10A150035 Air Valve Stem

11A120007 Teflon O-Ring

12A150036 Air Valve Seat Set

12-1 A120010 Gasket

1-1

1

1-3

1-2

7

2

	Spray Pattern		Problem		Remedies
				1.
		1.	Air enters between fluid nozzle and seat		Remove fluid nozzle to clean seat
		2.	of gun body.	2.	Tighten fluid needle packing.
packing.			Air is suctioned from fluid needle
	Fluttering
		1.	Paint buildup on air cap partially clogs	1.	Remove obstructions from horn holes, but
			horn holes. Air pressure from both horns		do not use metal objects to clean horn
	Crescent		differs.		holes.
		1.	Paint buildup on air cap partially clogs	1.	Remove obstructions.
			horn hole or air cap center hole, or causes		Replace if damaged
			damage
	Inclining	2.	Loose fluid nozzlesection	2.	Remove nozzle and clean seated
		1.	Paint viscosity too low	1.	Add paint to increase viscosity
	Split	2.	Fluid output too high	2.	Adjust fluid or pattern adjustment knob
		1.	Paint viscosity too high	1.	Reduce viscosity
	Heavy Center	2.	Fluid output too low	2.	Increase fluid output
		1.	Fluid nozzle and fluid needle set are not	1.	Clean or replace fluid nozzle and fluid
			seated properly.	2.	needle set.
		2.	The first stage travel of trigger (when only		Replace fluid nozzle and fluid needle set.
			air discharges) decreases.

12-2	A150037	Seat Nut
12-3	A060008	O-Ring
13	A150038	Air Valve

14A110007 Air Valve Spring

15A150039 Fluid Adjust Guide Set

15-1	A120011	Teflon O-Ring
15-2	A150040	Guide Nut
16	A150041	Air Nipple
17	X1000AVA	Air Regulator
17-1	A150042	Air Piston
17-2	A150043	E-Ring
17-3	A150044	Air Control Seat
17-4	A120012	Teflon O-Ring
17-5	A150045	Air Control Knob	6
18	A150046	Trigger Stud
19	A150047	Trigger
20	A150048	E-Ring
			6-2
		6-1

6-5

6-4

6-3

12-3

18

19

14

13

5

4

16

20

17

iod.

3-1

16

17-1

17-2

17-3

17-4

17-5

9

8

Spit 3. Paint buildup inside air cap set. 3. Clean air cap set.

TECHNICAL SPECIFICATIONS

Fluid Nozzle	1.0 mm	Air Consumption	7 cfm (200 L/min)
Feed Type	Side Gravity	Fluid Output	115 mL/min
Fluid Capacity	8.5 oz. (250 ml)	Air Inlet	1/4” NPS
Container Type	Side detachable cup	Fluid Inlet	1/4” NPS
Pattern Width	11” (280 mm)	Working Pressure	30 ~ 45 psi
Weight	1.3 lbs. (0.58 kgs)

WARRANTY

All Grex spray guns are warranted against manufacturing defects of material and manufacture or workmanship for a period of ONE year from the original date of purchase. This warranty does not cover fluid needles, fluid nozzles and o-rings since these parts need to be replaced occasionally due to normal wear. Any parts of the product covered under this warranty will be repaired or replaced at our option, which after examination proves to be defective in workmanship or material during the warranty per

This warranty does not apply to repair or replacement parts required due to misuse, abuse, normal wear and tear or repairs and alterations attempted. In no event shall Grex be liable for any indirect, incidental, or consequential damage from the sales or use of this product. This disclaimer applies both during and after the term of this warranty.

12

11

10

12-2

12-1

15

15-2

15-1

this warranty. 3

o have other rights, which vary from state to state.

This is the only warranty and our company makes no warranties express or implied, including merchantability and fitness for a practical purpose, after the one year term of

This limited warranty gives you specific rights and you may als

705 South Electric Ave. Alhambra CA, 91803

626.289.7618 Fax: 626.289-8121 info@grexairbrush.com © 2005 Grex Power Tools. All Rights Reserved.