Manuals / Grizzly / Power Tools / Saw

Grizzly G0537 Straight Cuts Curved Cuts, To make a straight cut, To make a curved cut

Models: G0537

1 31
Download 31 pages 9.41 Kb
Page 18
Image 18

Straight Cuts

 

Curved Cuts

 

 

 

Miter gauges and fences are not effective on scroll saws because most scroll saw blades are narrow and tend to follow the grain of the wood. Freehand cutting allows the operator to compen- sate for blade drift.

To make a straight cut:

1.Draw a straight line on your workpiece.

2.Turn the power ON and allow the motor to reach full speed.

3.Feed the workpiece slowly and steadily into the blade, keeping your hands to either side of the cutting line while pushing down. Make sure the blade is cutting on the waste side of the line (Figure 12).

Figure 12. Straight cut.

4.Scroll saw blades will have a tendency to drift. Compensate by adjusting the feed direction.

Note—The variation of hard and soft grain in wood will cause the scroll saw blade to deflect. If you are approaching hard grain at an angle, the feed rate must be slowed and pressure should be applied toward the side with the hard grain.

When cutting curves, preplan your cuts and leave tight inside curves for a second pass to minimize backing out. Cut sharp outside curves by cutting past the curve and looping around to cut from a different angle.

To make a curved cut:

1.Draw a pattern on your workpiece.

2.Choose a blade size based on the tightest curve in the workpiece. Smaller blades can cut tighter curves.

3.Rough cut the board down to a workable size.

4.Feed the workpiece into the blade with a slow and even pressure. Use your fingers to hold it down and thumbs to steer as shown in Figure 13.

Figure 13. Making a curved cut.

Note—When approaching a tight radius, slow down your feed rate, but do not stop. Give the teeth time to make the cut. Forcing the workpiece through the curve will cause the blade to twist or break. If your cut pro- duces waste in the curve’s interior, turn the power off and wait until all motion stops before removing the waste.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-16-

 

 

 

 

 

G0537 Scroll Saw

 

 

 

 

 

Page 17 Page 19
Page 18
Image 18
Grizzly G0537 instruction manual Straight Cuts Curved Cuts, To make a straight cut, To make a curved cut
Page 17 Page 19

G0537 specifications

The Grizzly G0537 is a powerful and versatile industrial table saw designed for serious woodworkers who demand precision and reliability in their woodworking projects. This robust saw boasts a range of features and technologies that cater to both professional craftsmen and hobbyists looking to elevate their woodworking experience.

One of the standout features of the Grizzly G0537 is its heavy-duty cast iron table, which measures a generous 27 x 40 inches. The large working surface provides ample space for cutting sheets of plywood and other materials while ensuring stability and accuracy during operations. The table is precision ground for a smooth surface, minimizing friction and enhancing the overall cutting experience.

Powered by a reliable 5 HP, 220V three-phase motor, the Grizzly G0537 delivers consistent power and speed, allowing users to tackle even the most challenging hardwoods with ease. The motor is equipped with a magnetic switch that enhances safety by providing a quick shutdown in case of an emergency. This feature is crucial for maintaining a secure working environment.

Another significant characteristic of the G0537 is its 50-inch rip capacity, enabling users to make wide crosscuts and rip cuts with significant efficiency. The saw features a precision tilt mechanism that allows the blade to be tilted from 0 to 45 degrees, which is essential for performing bevel cuts. The adjustable blade height also ensures that users can achieve the desired cutting depth with ease.

The G0537 is equipped with a built-in dust collection system, which helps maintain a clean working environment by efficiently capturing sawdust and debris. This technology not only enhances safety but also promotes better visibility while working.

Additionally, the Grizzly G0537 incorporates a quick-adjust rip fence, known as the "T-square" fence system, which ensures accurate and repeatable cuts. This easy-to-use fence system can be locked securely in place, boosting confidence in every cut made.

Overall, the Grizzly G0537 is a feature-rich table saw that combines safety, precision, and user-friendly technologies. Its sturdy design and exceptional capabilities make it an ideal choice for both professional and avid woodworkers seeking high performance and durability in their woodworking tools. Whether for intricate projects or large-scale production, the G0537 stands out as a reliable solution that meets various woodworking needs.