3.Install the handle onto the top of the canister filter by tightening the hex bolt against the flat of the shaft (Figure 15).
Shaft Flat
Figure 16. Installing canister handle.
4.Place the canister filter on top of the collec- tor.
5.Position the metal belt clamp around the bot- tom of the canister filter so it will compress around the foam strip (Figure 17).
Figure 17. Installed and secured canister filter.
Collection Bag |
|
Components and Hardware Needed: | Qty |
Clear Collection Bag | 1 |
Metal Belt Clamp | 1 |
Narrow Foam Strip | 1 |
Tools Needed: |
|
Wrench or Socket 10mm | 1 |
To install the collection bag: |
|
1.Secure the narrow foam strip around the out- side bottom rim of the collector and trim the excess.
2.Hook the clear collection bag on the hooks around the bottom of the collector. (Figure 18).
Collector Hooks
Figure 18. Trimmed foam strip and collector
hook locations.
|
|
|
|
|
|
|
|
|
| G0548 2 HP Dust Collector | |
|
|