Coolant |
|
Horsepower | 1/8 HP |
Voltage | 220V |
Prewired | 220V |
Phase | Three |
Amps | 0.5A |
Cycle | 60 Hz |
Number Of Speeds | 1 |
Bearings | Shielded, Permanently Lubricated |
Main Specifications: |
|
Operation Info |
|
Max. Dist Wheel To Table | 15 in. |
Max. Distance Table To Spindle Center | |
Longitudinal Travel | |
Cross Travel | 11 in. |
Spindle Dia | |
Spindle Speed | 3450 RPM |
Max. Grinding Length | |
Max. Grinding Width | 10 in. |
Table Speed | 200 - 1000 in/min |
Grinding Wheel Bore | |
Grinding Wheel Diameter | 8 in. |
Grinding Wheel Width | 1 in. |
Downfeed Range | 0.0001 - 0.001 in. |
Vertical Handwheel Graduation | 0.0005 in. |
Vertical Handwheel Revolution | 0.1 in. |
Crossfeed Handwheel Graduation | 0.001 in. |
Crossfeed Handwheel Revolution | 0.2 in. |
Crossfeed of Saddle Range | 11 in. |
Table Info |
|
Table Size Length | 20 in. |
Table Size Width | 10 in. |
Floor To Table Height | |
T Slot Size Width | 1/2 in. |
T Slot Size Height | 1 in. |
Stud Size | 1/2 in. |
Head Size | 7/8 in. |
Magnetic Chuck Info |
|
Magnetic Chuck Size Length | 20 in. |
Magnetic Chuck Size Width | 10 in. |
Construction |
|
Table Const | Cast Iron |
Body Const | Cast Iron |
Base Const | Cast Iron |
Spindle Bearing Type | Shielded and Permanently Lubricated |
Paint | Epoxy |
Other |
|
Column Size Width | |
Column Size Length | |
Coolant Tank Width | |
Coolant Tank Length | |
Coolant Tank Height | 12 in. |
Hydraulic Tank Capacity | 13.55 GAL |
Model G0567 | The information contained herein is deemed accurate as of 10/7/2008 and represents our most recent product specifications. | PAGE 2 OF 3 |
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. |