Grizzly G0583Z owner manual Test Run, To test run the machine

Test Run

Do NOT put hands or small objects near inlet openings during opera- tion. Objects sucked into the inlet will hit the impel- ler blade. Failure to heed this warning could result in property damage or personal injury.

Once the assembly is complete, test run your machine to make sure it runs properly.

If, during the test run, you cannot easily locate the source of an unusual noise or vibration, stop using the machine immediately, then review the Troubleshooting on Page 24.

If you still cannot remedy a problem, contact our Tech Support at (570) 546-9663 for assistance.

-16-

To test run the machine:

1.Make sure you have read the safety instruc- tions at the beginning of the manual and that the machine is set up properly.

2.Make sure all tools and objects used during setup are cleared away from the machine.

3.Connect the machine to the power source.

4.Turn the machine ON.

5.Listen to and watch for abnormal noises or actions. The machine should run smoothly with little or no vibration or rubbing noises.

—Strange or unusual noises should be inves- tigated and corrected before operating the machine further. Always disconnect the machine from power when investigating or correcting potential problems.

6.Turn the machine OFF.

Model G0583Z (Mfg. 3/09+)