SECTION 4: OPERATIONS
Operation Safety |
| Cutting Angle |
|
|
|
|
|
|
Damage to your eyes, lungs, and ears could result from using this machine without proper protective gear. Always wear safety glasses, a respirator, and hearing protection when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving machinery.
NOTICE
This bandsaw is for trained operators only. WE STRONGLY RECOMMEND that you read books, trade magazines, and get formal training before beginning any projects. Regardless of the content in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training.
Your bandsaw has a locking turret with a range of 0° to 60° degrees.
To set the angle of cut:
1.Raise the bow to the highest position and lock in place (Figure 12).
Feed ON/OFF
Figure 12. Feed ON/OFF Valve.
2.Move the swivel lock lever (Figure 13), to the left and rotate the headstock until the scale indicates the angle that you need.
Unlock | Lock |
Figure 13. Swivel lock lever.
3. Move the swivel lock lever to the right to lock the headstock in place. The cutting angle is now set.
G0613/14 Swivel Mast Metal Cutting Bandsaw |
