Grizzly G0653 Coolant, Main Specifications Operation Info, Headstock Info, Tailstock Info

Coolant
Type	DV Induction
Horsepower	1/8
Voltage	220/440
Prewired	220
Phase	Three
Amps	0.32/0.22
Speed	3450
Cycle	60
Number Of Speeds	1
Power Transfer	Direct Drive
Bearings	Shielded and Permanently Sealed
Main Specifications:
Operation Info
Swing Over Bed	17 in.
Dist Between Centers	40 in.
Swing Over Cross Slide	7-1/2 in.
Swing Over Saddle	17 in.
Swing Over Gap	26 in.
Max Tool Bit Size	1 in.
Headstock Info
Spindle Bore	3-3/8 in.
Spindle Taper	MT#7
No Of Spindle Speeds	Variable in 3 Ranges
Range Of Spindle Speeds	10-2000 RPM
Spindle Type	D1-8 Camlock
Spindle Bearings	Tapered Roller
Tailstock Info
Tailstock Travel	5-5/8 in.
Tailstock Taper	MT#5
Tailstock Barrel Diameter	3 in.
Dimensions
Bed Width	18 in.
Leadscrew TPI	2.54
Leadscrew Length	26-1/2 in.
Steady Rest Capacity	4-1/2 in.
Leadscrew Diameter	40 mm
Floor To Center Height	43-1/2 in.
Construction
Base Construction	Cast Iron
Headstock Construction	Cast Iron
Headstock Gears Construction	Flame Hardened Steel
Bed Construction	Induction Hardened Cast Iron
Paint	Urethane
Other Specifications:
Country Of Origin	Taiwan
Warranty	1 Year
Serial Number Location	Machine ID Label on Front of Operator Guard

Model G0653	The information contained herein is deemed accurate as of 10/7/2008 and represents our most recent product specifications.	PAGE 2 OF 3
	Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.