7.Remove the table (see the Manual Instructions regarding “Table”). Roughly align the upper and lower wheels by laying a straight edge across both wheels See Figure 2. Tighten the bolt until it is tight, then loosen it 1⁄4 to 1⁄2 turn.

8.Install the 105" blade supplied in the kit Ref #10 following the instructions in the G1019 Manual. Apply tension to the blade as described in the manual. Adjust the tracking knob until the upper and lower wheels are parallel.

9.Check wheels for coplanarity. See Figure 3. If wheels are not coplaner, tap on the bottom edge of the Upper Frame Arm with a rubber or wooden mallet or twist it the direction needed and check again. When wheels are coplaner, tighten the bolt Ref #4. Check coplaner again. Adjust as needed. Remember that it is important the blade be tensioned during this process.

10.Adjust the tension and tracking as outlined in the manual. Rotate the wheels with your finger to assure that the blade is tracking. If there is any difficulty in getting the blade to track properly, go back to Step 7 and realign the wheels.

11.Remove the Upper Guide Assembly Ref H from Ref D and attach it to the 16" Guide Post Ref #2.

12.Place the Guide Post Assembly onto the machine by sliding the Guide Post up through the Bracket Ref F and tightening the Hand Knob C.

13.Replace the Blade Guard Ref K with the extended version Ref #3.

14.Replace the extended Guard Ref J with Ref #8 on the studs on the left hand side of the machine.

Straight Edge

Figure 2. Straight edge in use.

15.Adjust the Upper and Lower Guide Assemblies as required.

16.Replace the table.

17.Replace the Upper and Lower Wheel Covers.

18.Test the blade movement and clearance before running the machine. Make sure the blade is moving freely and not bind- ing. Reconnect the bandsaw to electrical power.

Coplaner

Parallel, Not

Not Parallel

Adjust

 

 

Coplaner

Not Coplaner

Tracking Knob

Edge

Straight Edge

 

 

 

 

 

Straight

Contacts Top

 

 

And Bottom of

 

 

 

 

 

 

Both Wheels

 

 

Figure 3. Adjust upper wheel until coplaner.

Model G1127

Page 1 Page 3
Page 2
Image 2
Grizzly G1127 instruction sheet Straight Edge
Page 1 Page 3

G1127 specifications

The Grizzly G1127 is an exceptional piece of equipment designed for woodworking enthusiasts and professionals alike. This high-performance tool is known for its versatility and robust construction, making it an essential addition to any workshop.

One of the standout features of the Grizzly G1127 is its powerful motor, which ensures consistent performance even under heavy load. The machine is equipped with a 1 HP motor, providing sufficient horsepower for a variety of applications, from cutting and shaping to joinery tasks. This motor is designed with efficiency in mind, allowing users to maximize their productivity without sacrificing quality.

Another notable characteristic of the G1127 is its precision-engineered components. The machine features a solid cast iron table that offers a stable surface for workpieces. This material helps to reduce vibrations during operation, ensuring accuracy and smoothness in every cut. The table also comes with a built-in miter gauge and adjustable fence, allowing for precise angle cuts and consistent measurements.

The Grizzly G1127 incorporates advanced technologies that facilitate ease of use and better results. The tool boasts a quick-release blade tension system, making it easy to change blades without the hassle of tools. Additionally, it features a unique dust collection port, which helps maintain a clean working environment by effectively removing debris and sawdust from the workspace. This contributes not only to cleanliness but also enhances visibility while working on projects.

Safety is a crucial aspect of the Grizzly G1127’s design. The machine is equipped with various safety features, such as a blade guard system and an emergency shut-off switch. These features ensure that users can operate the tool safely while minimizing the risk of accidents.

The Grizzly G1127 is designed for user comfort, featuring ergonomic handles and an adjustable height feature that allows users to tailor the machine to their specific needs. This consideration for user ergonomics enhances the overall experience, making prolonged use more comfortable.

In summary, the Grizzly G1127 is a well-rounded woodworking tool that combines power, precision, and safety. With its sturdy design, efficient motor, and user-friendly features, it is perfectly suited for both amateur woodworkers and seasoned professionals, paving the way for high-quality craftsmanship in any project.
Top Page Image Contents