Additional Safety for Combination Sanders

DISC DIRECTION. Only sand on the downward- moving left side of the sanding disc. Sanding on the upward-moving right side of the sanding disc forces the operator to rely only on hands (rather than the table) for support, which increases the risk of workpiece "kick-out" and impact/abrasion injuries.

AVOIDING ENTANGLEMENT. Becoming entan- gled in the moving parts of this machine can cause pinching and crushing injuries. To avoid these hazards, DO NOT wear loose clothing, gloves, or jewelry, and tie back long hair. Keep all guards in place and secure.

HAND PLACEMENT. Rotating sandpaper can remove a large amount of flesh in a few seconds. Always keep hands away from the sandpaper during operation. Never touch moving sandpaper on purpose.

MINIMUM STOCK DIMENSION. Small workpieces can be aggressively pulled from your hands and present injury hazards. Always use a jig or other holding device when sanding small workpieces, and keep your hands and fingers at least 2" away from the sanding surface.

WORKPIECE SUPPORT. Workpiece kickback can occur with violent force if the workpiece is not properly supported during operation. Always sand with the workpiece firmly against the table or another support device.

SANDING DUST. Sanding creates large amounts of dust and flying chips that can lead to eye injury or respiratory illness. Reduce the risk of these hazards by always wearing approved eye and respiratory protection when using the sander.

WORKPIECE INSPECTION. Nails, staples, knots, or other imperfections in the workpiece can be dislodged and thrown from the sander at a high rate of speed into the operator or bystanders, or cause damage to sandpaper or sander. Never attempt to sand stock that has embedded foreign objects or questionable imperfections.

FEEDING WORKPIECE. Forcefully jamming the workpiece into the sanding surface could cause the workpiece to be aggressively grabbed and pull your hands into the sanding surface. Always firmly grasp the workpiece in both hands and ease it into the sandpaper using light pressure.

SANDPAPER CONDITION. Sandpaper that is worn or damaged not only produces poor sand- ing results, but could fly apart, aggressively grab the workpiece, and throw debris at the operator. Always inspect the sandpaper before operation and replace it if worn or damaged.

IN-RUNNING NIP POINTS. The gap between the moving sandpaper and the fixed table/support creates a pinch point for fingers or workpieces; the larger this gap is, the greater the risk of fingers or workpieces getting caught in it. Minimize this risk by adjusting the table no more than 1⁄16" away from the sandpaper.

WORKPIECE INTEGRITY. Only sand solid workpieces that can withstand the forces required for power sanding. Make sure the shape of the workpiece can be properly supported on the table; avoid sanding workpieces without flat bot- tom surfaces unless some type of jig is used to maintain support and control when the sanding force is applied.

Like all machinery there is potential danger when operating this machine. Accidents are fre- quently caused by lack of familiarity or failure to pay attention. Use this machine with respect and caution to decrease the risk of operator injury. If normal safety precautions are overlooked or ignored, serious personal injury may occur.

-10-

Model G1183/G1276 (Mfg. Since 3/10)

Page 11 Page 13
Page 12
Image 12
Grizzly G1183 owner manual Additional Safety for Combination Sanders
Page 11 Page 13

G1183 specifications

The Grizzly G1183 and G1276 are two versatile tools that cater to woodworking enthusiasts and professionals alike. These machines stand out in the realm of high-performance woodworking equipment, delivering excellent functionality and precision.

The Grizzly G1183 is a heavy-duty drum sander designed for efficient sanding of wood surfaces. It features a unique two-drum design, which allows for increased material removal and a smoother finish in less time. The G1183 comes with a powerful 1.5 HP motor, providing ample torque for demanding sanding tasks. Its variable speed conveyor belt is a significant advantage, enabling users to adjust the speed according to their specific needs, which is crucial for achieving optimal results on different wood types. The machine’s adjustable height allows for sanding boards of various thicknesses, making it highly adaptable for a range of projects.

On the other hand, the Grizzly G1276 is a 12-inch planer that offers superb performance in thicknessing wood. It features a powerful 15 HP motor, capable of handling larger, tougher jobs effortlessly. This planer is equipped with an efficient dust collection system that helps maintain a cleaner workspace by minimizing wood chips and debris during operation. The G1276’s easy-to-read scale and adjustable depth control make it user-friendly, ensuring that even novice woodworkers can achieve professional-quality finishes.

Both machines are crafted with durability in mind. The cast iron construction of the G1183 and G1276 contributes to their stability and longevity, reducing vibrations during operation for a more consistent finish. Furthermore, the Grizzly lineup is known for incorporating advanced technologies, such as precision ground tables and high-quality bearings, ensuring that users get the best possible performance from their investment.

In conclusion, Grizzly G1183 and G1276 are excellent choices for anyone seeking reliability and efficiency in their woodworking projects. With their powerful motors, innovative features, and durable construction, these machines are designed to handle a variety of tasks while delivering outstanding results, making them invaluable assets in any workshop. Whether you’re a seasoned professional or just starting, the Grizzly G1183 and G1276 can elevate your woodworking experience, ensuring that you achieve impressive outcomes on every project.
Top Page Image Contents