Unpacking

 

Piece Inventory

 

 

 

 

 

 

This machine is shipped from the manufacturer in two carefully packed cartons. If you discover the machine is damaged after you’ve signed for deliv- ery, and the truck and driver are gone, you will need to file a freight claim with the carrier. Save the containers and all packing materials for possible inspection by the carrier or its agent. Without the packing materials, filing a freight claim can be difficult. If you need assistance determining whether you need to file a freight claim, or with the procedure to file one, please contact our Customer Service.

The G1495 is a heavy machine (265 lbs. shipping weight). DO NOT over-exert yourself while unpacking or moving your machine – get assistance. In the event that your Lathe must be moved up or down a flight of stairs, be sure that the stairs are capable of supporting the combined weight of people and the machine. Serious personal injury may occur.

Figure 3. Parts Inventory.

G1495 Heavy-Duty Wood Lathe

Parts should be as follows (See Figure 3):

•Stand Assembly w/ Motor Installed

•Lathe Assembly

•V-Belt

•Right Hand Stand

•Support Shelves (2)

•Floor Brackets (3)

•Shield

•Shield Support Tube

•Shield Sliding Support

•Shield Hardware Bag

Mounting Bars

2

Hex Bolts 5⁄16" - 18 x 41⁄2"

2

Flat Washers 5⁄16"

4

• Tailstock Handle

 

• Sanding Attachments

 

Flap Sander

1

Pneumatic Drum

1

Aluminum Sanding Disc

1

Garnet Sanding Disc

1

•Arbor for Mounting Sanding Acc

•Tilting Work Table

•Work Table Support Spindle

•Outboard Tool Rest Bracket w/ 3 Bolts

•Outboard Tool Rest Support

•Outboard Tool Rest Post w/ Nut

•Faceplate

•Miter Gauge

•Tool Rest Holder

•Tool Rest

•Knockout Bar

•Allen® Wrench 6mm

•Hardware Bag

Hex Bolts 5⁄16" - 18 x 3⁄4"

18

Flat Washers 5⁄16"

36

Cap Screws 5⁄16" - 18 x 21⁄2"

6

Hex Nuts 5⁄16" - 18

24

In the event that any generally used fasteners are missing, we can replace them, or, for the sake of expediency, replacements can be obtained at your local hardware store.

NOTICE

A full parts list and illustrations can be found at the back of this manual. Use this information to identify parts or to clarify assembly steps.

-9-