Grizzly G2790 instruction manual Unpacking, Parts Inventory

Unpacking

This Universal Knife Grinder is shipped from the manufacturer in a carefully packed carton. If you discover the machine is damaged after you’ve signed for delivery, and the truck and driver are gone, you will need to file a freight claim with the carrier. Save the containers and all packing mate- rials for possible inspection by the carrier or its agent. Without the packing materials, filing a freight claim can be difficult. If you need assis- tance determining whether you need to file a freight claim, or with the procedure to file one, please contact our Customer Service.

When you are completely satisfied with the con- dition of your shipment, you should inventory its parts.

Parts Inventory

After all the parts have been removed from the carton, you should have:

• Table Assembly

• Knife Support Assembly

• Work Plate Assembly

• Pivot Plate Assembly

• Hardware
-Hex Head Jam Nuts 1⁄4" - 20	5
-Washers 1⁄4"	5
-Hex Head Bolts 5/16" - 18 x 1/2"	3

In the event that any non-proprietary parts are missing (e.g. a nut or a washer), we would be glad to replace them, or, for the sake of expedi- ency, replacements can be obtained at your local hardware store.

NOTICE

A full parts list and breakdown can be found toward the end of this manual. For easier assembly, or to identify missing parts, please refer to the detailed illustrations at the end of the manual.

-6- G2790 Universal Knife Grinder