Read the manual before assembly and opera- tion. Become familiar with the accessory and it’s operation before beginning any work. Serious personal injury may result if safety or operational information is not understood or fol- lowed.
Most importantly, we stand behind our products. If you have any service questions or parts requests, please call, write or email us at the locations listed below.
Grizzly Industrial, Inc.
2406 Reach Road
Williamsport, PA 17701
Phone: (570)
Fax: (800)
Web Site: http:⁄⁄www.grizzly.com
The specifications, drawings, and photographs illustrated in this manual represent the Model G4227 as supplied when the manual was pre- pared.
To operate this sliding table on a tablesaw or shaper safely and efficiently, it is essen- tial to become as familiar with the charac- teristics of both as much as possible. The time you invest before you begin to use your Model G4227 will be time well spent. DO NOT operate the machine until you are completely familiar with the contents of this manual. Make sure you read and understand all of the safety procedures. If you do not understand something, DO NOT operate the machine.
However, owing to Grizzly’s policy of continuous improvement, changes may be made at any time with no obligation on the part of Grizzly. Whenever possible, though, we send manual updates to all owners of a particular tool or machine. Should you receive one, we urge you to insert the new information with the old and keep it for reference.
Unpacking
The Model G4227 is shipped from the manufac- turer in a carefully packed carton. If you discover the sliding table is damaged after you’ve signed for delivery, please call Customer Service imme- diately for advice.
Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise filing a freight claim can be difficult.
The sliding table repre- sents a heavy load at 75 pounds. Seek assistance before beginning assem- bly.
When you are completely satisfied with the con- dition of your shipment, you should inventory its parts.
Clean up
The sliding table surface is coated with a plastic film that protects it from damage during shipment. Heat the film with a hair dryer and remove the protective film with great care to avoid peeling the laminate off.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
G4227 Sliding Table | |||||
