MODEL G4570 |
|
GRINDING JIG |
INSTRUCTIONS |
To reduce the risk of serious injury when using this grinding jig, take the following precautions:
1.GRINDER OWNER'S MANUAL. Read and understand the owner's manual for your grinder and always follow all of the safety precautions and instructions for your grinder.
2.EYE/FACE PROTECTION. Always wear safety glasses or a face shield to protect yourself from flying material.
3.HAND PLACEMENT. Always keep your hands and fingers away from the spinning grinding wheel, and protect yourself from the sharp edges of the tool.
4.SECURE CLAMPING. Make sure the tool is securely clamped in the jig and that the table is firmly locked in the proper posi- tion.
Introduction
The Model G4570
If you need help with your new grinding jig, call our Tech Support at: (570)
Figure 1. Using the Accu-Sharp Jig to grind the
bevel of a flat chisel.
Inventory
After removing the contents of the shipping pack- age, lay them out and refer to Figure 2 to inven- tory the components.
Tool
Clamping
Jig
Auxiliary
Table
Mounting
Screws
Figure 2. Model G4570 inventory.
Copyright © NOVEMBER, 2008 By Grizzly Industrial, Inc.
Warning: No portion of this manual may be reproduced in any shape Or form without the written approval of Grizzly Industrial, inc.
#TS11341 printed in CHINA