Grizzly G5049Z instruction manual Assembly, Stand/motor

SECTION 4: ASSEMBLY

Stand/motor

The G5049Z Combination Sander stand is an open frame style.

Note: Assembling the G5049 Sander requires heavy lifting. We strongly recommend having an assistant help with the assembly.

1.Attach Rubber Feet to base using the four 5⁄16''-18 x 1'' Hex bolts, Hex Nuts and Flat Washers provided. Figure 2.

Figure 2.

2.Carefully tip the sander on its side and attach the four legs to the stand top and the cross braces to the legs.

3.Lift the sander upright and remove the cover. Figure 3.

Figure 3.

4.Attach the motor mount to the underside of the stand. Finger tighten only. Figure 4.

Figure 4.

-8- G5049Z Combination Sander