Atomizing Cap and
Fan Adjustments
The atomizing cap needs to be adjusted for horizontal or vertical spraying patterns. Spraying in the wrong direction may lead to material build up on the atomizing cap horn. Many performance problems are caused by clogged atomizing holes on the atomizing cap horns (see Cleaning on Page 13).
Holes
Stroke
Figure 6. Set up for horizontal stroke
direction with vertical fan pattern.
Pattern Control
Stroke
Figure 7. Set up for vertical spray stroke
with horizontal fan pattern.
Rotating the pattern adjustment control in Figure 7 will give you a range between the two patterns in Figure 8.
Figure 8. Fan adjustment.
Model G5352 Spray Gun |
