Grizzly Setup, InventoryAssembly, Model G5354 Inventory Figure, To assemble the airbrush

SECTION 3: SETUP

InventoryAssembly

Your airbrush left our warehouse in a care- fully packed box. If you discover the air- brush is damaged after you have signed for delivery, please immediately call Customer Service at (570) 546-9663 for advice.

Save the containers and all packing materi- als for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult.

After you have unpacked the carton you should find the following:

Model G5354 Inventory (Figure 1)
A.	Glass Jar w/Enclosed Lid	1
B.	Glass Jar w/Suction Lid	1
C.	Air Hose	1
D.	Airbrush	1
E.	Airbrush Hanger	1
F.	Metal Jar	1
G.	Adapter	1
H.	Nozzle Tip Wrench 2mm	1
I.	Eyedropper	1

Prior to assembly and use of the air- brush, it is essential that all parts be thor- oughly cleaned and dried. Please refer to Cleaning in the MAINTENANCE section on Page 11 for more detailed instructions.

During assembly, make sure all connec- tions are tight enough to prevent air leaks but not so tight as to cause damage.

To assemble the airbrush:

1.Attach one end of the air hose to the airbrush body, as shown in Figure 2.

Figure 2. Air hose attached to airbrush.

A

C

D

F

G

B

E

H

I

2.Attach the adapter to the air hose, as shown in Figure 3.

Figure 1. Model G5354 inventory.

Model G5354 Airbrush

Figure 3. Adapter attached to air hose.

-7-