-20- g5770 36" slip roll 22 gauge
figure 30. Releasing top roller.
3. Move the top roller lift lever, as shown in
figure 30, to raise the top roller. remove the
workpiece.
4. return the top roller lift lever to its original
position, close the upper bushing assembly,
then lower the top roller release lever (figure
31).
figure 31. Securing top roller.
5. Finger-tighten the hex bolt and jam nut to
secure the top roller bushing.
Removing Workpiece
to remove cylindrical workpieces :
1. loosen the jam nut and hex bolt until the top
roller release lever can be lifted (figure 28).
top roller
release lever
upper Bushing
assembly
2. lift the top roller release lever, then open the
upper bushing assembly (figure 29).
the compone nts of this machine
are ver y heavy and workpi eces can be
cumbersome and have sharp edges. Always
wear gloves and fully support components
and wor kpieces. Get help if necessary.
failure to do this may result in personal
injur y.
figure 28. Hex bolt and jam nut.
top roller
release lever
top roller
release lever
upper Bushing
assembly
Jam nut
figure 29. Upper bushing assembly release.
hex Bolt
top roller
lift lever
top roller
lift lever
top roller