GENERAL INFORMATION
Grizzly Industrial, Inc. is proud to offer the Model G7153
The Model G7153 is intended for home and medium duty professional use. The G7153 fea- tures cast iron construction for rigidity and strength. This bender has a bending capacity of 281⁄2 tons per square inch which can be used to shape iron, steel, wrought iron, brass, copper and aluminum.
Maximum Capacities for these various materials are:
Steel & Iron | 5⁄8" Round Stock |
| 1⁄2" x 1⁄2" Square Stock |
| 13⁄16" x 5⁄16" Strip Stock |
Wrought Iron | 15⁄32" Round Stock |
| 13⁄32" x 13⁄32" Square Stock |
| 13⁄16" x 1⁄4" Strip Stock |
Brass & Copper | 5⁄8" Round Stock |
| 15⁄32" x 15⁄32" Square Stock |
| 13⁄16" x 5⁄16" Strip Stock |
Aluminum | 23⁄32" Round Stock |
| 19⁄32" x 19⁄32" Square Stock |
| 13⁄16" x 13⁄32" Strip Stock |
We are also pleased to provide this manual with the Model G7153. It was written to guide you through assembly, review safety considerations, and cover general operating procedures. It repre- sents our latest effort to produce the best docu- mentation possible. If you have any criticisms that you feel we should address in our next printing, please write to us at the Bellingham, WA address at the end of this section.
Most important, we stand behind our tools. We have an excellent service department at your dis- posal should the need arise. If you have any ser- vice questions or parts requests, please call or write to us at the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Circle
Muncy, PA 17756
Phone:(717)
Fax:(800)
Web Site: http://www.grizzlyimports.com
To comment on this manual write to:
Grizzly Industrial, Inc.
C⁄O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227
To operate this, or any other tool safely and efficiently, it is essential to become as familiar with it as possible. The time you invest before you begin to use your Model G7153 will be time well spent. DO NOT operate this tool until you are completely familiar with the contents of this manual.
G7153 Universal Bender |