Safety Instructions For Power Tools

9.USE PROPER EXTENSION CORD. Make sure your extension cord is in good condi- tion. Conductor size should be in accor- dance with the chart below. The amperage rating should be listed on the motor or tool nameplate. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Your extension cord must also contain a ground wire and plug pin. Always repair or replace exten- sion cords if they become damaged.

Minimum Gauge for Extension Cords

 

 

LENGTH

 

AMP RATING

25ft

 

50ft

 

100ft

0-6

18

 

16

 

16

7-10

18

 

16

 

14

11-12

16

 

16

 

14

13-16

14

 

12

 

12

17-20

12

 

12

 

10

21-30

10

 

10

 

No

 

 

 

 

 

 

10.WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry which may get caught in moving parts. Non-slip footwear is recommended. Wear protective hair cov- ering to contain long hair.

11.ALWAYS USE SAFETY GLASSES. Also use face or dust mask if cutting operation is dusty. Everyday eyeglasses only have impact resistant lenses, they are NOT safety glasses.

12.SECURE WORK. Use clamps or a vise to hold work when practical. It is safer than using your hand and frees both hands to operate tool.

13.DO NOT OVER-REACH.Keep proper footing and balance at all times.

14.MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest performance. Follow instructions for lubri- cating and changing accessories.

15.USE RECOMMENDED ACCESSORIES.

Consult the ownerÕs manual for recom- mended accessories. The use of improper accessories may cause risk of injury.

16.REDUCE THE RISK OF UNINTENTION- AL STARTING. On machines with magnet- ic contact starting switches there is a risk of starting if the machine is bumped or jarred. Always disconnect from power source before adjusting or servicing. Make sure switch is in OFF position before reconnecting.

17.MANY WOODWORKING TOOLS CAN “KICKBACK” THE WORKPIECE toward the operator if not handled properly. Know what conditions can create ÒkickbackÓ and know how to avoid them. Read the manual accom- panying the machine thoroughly.

18.CHECK DAMAGED PARTS. Before fur- ther use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, bind- ing of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced.

19.NEVER LEAVE TOOL RUNNING UNAT- TENDED. TURN POWER OFF. Do not leave tool until it comes to a complete stop.

20.NEVER OPERATE A MACHINE WHEN TIRED, OR UNDER THE INFLUENCE OF DRUGS OR ALCOHOL. Full mental alert- ness is required at all times when running a machine.

21.NEVER ALLOW UNSUPERVISED OR UNTRAINED PERSONNEL TO OPER- ATE THE MACHINE. Make sure any instructions you give in regards to machine operation are approved, correct, safe, and clearly understood.

22.IF AT ANY TIME YOU ARE EXPERIENC- ING DIFFICULTIES performing the intend- ed operation, stop using the machine! Then contact our service department or ask a qualified expert how the operation should be performed.

H4378/H4379 Slimline Bench Grinder

-3-

Page 4 Page 6
Page 5
Image 5
Grizzly G7298, G7299 instruction manual Length AMP Rating
Page 4 Page 6

G7298, G7299 specifications

Grizzly G7299 and G7298 are both remarkable additions to the lineup of woodworking tools designed for professionals and creators. These models stand out due to their robust features and advanced technologies, engineered to enhance the efficiency and precision of various woodworking tasks.

The Grizzly G7299 is a 9" x 19" variable-speed metal cutting bandsaw that offers exceptional versatility. One of its main features is the adjustable blade speed, with options ranging from 80 to 280 FPM, allowing users to tailor the cutting speed according to the material being processed. The powerful 1 HP motor is another highlight, providing ample power for cutting through tough metals with ease. Equally, the G7299 is equipped with an easy-to-read digital display to monitor speed settings, enhancing user control.

For added convenience, the G7299 includes a large cast iron table which provides stability during operation. The table is also adjustable, enabling users to make angled cuts with precision. The built-in work light illuminates the cutting area, ensuring that users can see clearly even in low-light conditions. Safety is a priority with features like a blade guard and a quick-release tension mechanism for easy blade changes.

On the other hand, the Grizzly G7298 brings its own set of advantages as a high-performance 10" table saw. This model features a powerful 2 HP motor and a 30" rip capacity, making it suitable for larger projects. The G7298’s rack and pinion fence system ensures accurate and smooth adjustments, allowing users to achieve precise cuts consistently.

Additionally, the G7298 boasts a sturdy cast iron tabletop, which minimizes vibration and improves stability, thereby enhancing the quality of cuts. The integrated dust collection port helps maintain cleanliness in the workspace, conveniently connecting to most standard shop vacuums.

Both models are built with durability in mind, constructed from high-quality materials suited for heavy-duty use. They appeal to both hobbyists and professional woodworkers alike due to their reliability and performance. The Grizzly G7299 and G7298 are perfect examples of how modern technology and engineering come together to fulfill the needs of today’s woodworking enthusiasts, ensuring that every project is completed with precision and ease.
Top Page Image Contents