Safety Instructions For Power Tools

9.USE PROPER EXTENSION CORD for the charger. Make sure your extension cord is in good condition. Conductor size should be in accor- dance with the chart below. The amperage rating should be listed on the motor or tool nameplate. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Your extension cord must also contain a ground wire and plug pin. Always repair or replace extension cords if they become damaged.

Minimum Gauge for Extension Cords

AMP

 

LENGTH

 

RATING

25ft

50ft

100ft

0-6

18

16

16

7-10

18

16

14

11-12

16

16

14

13-16

14

12

12

17-20

12

12

10

21-30

10

10

No

10.WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neck- ties, rings, bracelets, or other jewel- ry which may get caught in moving parts. Non-slip footwear is recom- mended. Wear protective hair cover- ing to contain long hair.

11.ALWAYS USE SAFETY GLASSES. Also use face or dust mask if cutting operation is dusty. Everyday eye- glasses only have impact resistant lenses, they are NOT safety glass- es.

12.SECURE WORK. Use clamps or a vise to hold work when practical. It’s safer than using your hand and frees both hands to operate tool.

13.DON’T OVERREACH. Keep prop- er footing and balance at all times.

14.MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest performance. Follow instructions for lubricating and changing accessories.

15.DISCONNECT TOOLS before ser- vicing and changing accessories, such as blades, bits, cutters, and the like.

16.REDUCE THE RISK OF UNIN- TENTIONAL STARTING. Make sure switch is in off position before plugging in.

17.USE RECOMMENDED ACCES- SORIES. Consult the owner’s manual for recommended acces- sories. The use of improper acces- sories may cause risk of injury.

18.CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is dam- aged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mount- ing, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced.

19.NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don’t leave tool until it comes to a complete stop.

G8593 14.4V Cordless Set

-4-

Page 3 Page 5
Page 4
Image 4
Grizzly G8593 manual AMP Length Rating
Page 3 Page 5

G8593 specifications

The Grizzly G8593 is a powerful and versatile benchtop milling machine designed to cater to the needs of both hobbyists and professionals in the metalworking industry. Known for its robust construction and precision, the G8593 has earned a reputation for being a reliable choice for milled parts, intricate designs, and a variety of machining tasks.

One of the standout features of the Grizzly G8593 is its 1 HP motor, which provides ample power for a range of materials including aluminum, wood, and plastics. The machine operates at variable speeds, allowing users to adjust the spindle speed between 100 and 2500 RPM. This flexibility accommodates different material types and thicknesses, enabling precision machining for delicate and more substantial components alike.

The G8593 boasts a spacious table measuring 31.5 inches by 7.5 inches, which offers sufficient area for working with larger workpieces while maintaining stability and accuracy during operation. The table features T-slots designed to facilitate clamping and securing materials in place, promoting safety and efficiency throughout the milling process. Additionally, the table can be adjusted in both the X and Y axes, providing enhanced control over workpiece positioning.

Equipped with a 3-axis digital readout (DRO), the Grizzly G8593 allows users to monitor and adjust the machine's movements precisely. The DRO is intuitive and easy to use, making it simpler to achieve the desired measurements and setup. The machine also comes with a 6-speeds spindle speed adjustment feature, enhancing versatility in cutting and machining operations.

Safety is a paramount concern in any workshop, and the G8593 addresses this with multiple protective features. The machine is fitted with an emergency stop button and a protective enclosure to minimize the risk of accidents during operation.

Overall, the Grizzly G8593 combines power, precision, and user-friendly features in a compact design, making it an excellent addition to any workshop. Whether you are a seasoned machinist or a beginner, this benchtop milling machine offers the performance you need to take on a variety of projects with confidence. Its durability, ease of use, and advanced technology make it a worthwhile investment for anyone looking to enhance their metalworking capabilities.
Top Page Image Contents