SECTION 6: MAINTENANCE
!
Always DISCONNECT POWER before servicing, adjusting, or doing main- tenance to reduce the risk of acci- dental injury or electrocution.
Blade Replacement
5.Be sure that the arrows on the blade point in a clockwise direction, matching the arrow on the blade guard.
6.Securely fasten arbor retaining bolt.
Motor Brushes
1.DISCONNECT THE SAW FROM POWER!
2.To replace worn motor brushes, remove the brush caps, located on either side of the motor housing, with a screw- driver (Figure 8).
1.DISCONNECT THE SAW FROM POWER!
2.Remove the arbor retaining bolt (reverse thread) and washers (Figure 7).
Figure 7. Replacing the diamond blade.
3.Thoroughly remove any dust accumu- lated on the spindle and washers.
4.Install the new blade with the concave portion of the washer contacting the blade.
Figure 8. Removing a brush cap.
3.Install replacement brushes and fasten brush caps (Figure 9).
Figure 9. Replacing a motor brush.
Model G8993 4" Tile Saw |
