10.Place the sanding drum into the spindle and thread it by turning it counterclockwise (Figure 16).
Figure 16. Inserting sanding drum.
11.To easily access the spindle nut, move the dust cover out of the way by removing the two hex bolts that secure it to the machine base (Figure 17).
Hex Bolt
Figure 17. Removing dust cover.
G9922 (Mfg. since 12/01)
12.Secure the sanding drum into the spindle by holding the spindle stationary with a 17mm wrench while tightening the drum with a 19mm wrench, as shown in Figure 18.
