MODEL G9947 |
MINI SHEET METAL CUTTER |
INSTRUCTION SHEET |
CUTTING & PINCHING HAZARD! Keep fin- gers at a safe distance from wheels, or fin- gers could be cut or severely pinched.
Introduction
The Model G9947 rotary shear will make quick work of cutting sheet metal to 16 gauge. Features an 11" handle. Weighs 4 lbs.
Inventory |
|
A. Mini Sheet Metal Cutter | 1 |
Pawl 
Ratchet
Figure 2. Ratchet and pawl.
Figure 1. Model G9947
If you need help with your new tool, call our Tech Support at: (570)
Setup & Operation
1.Securely mount the mini sheet metal cutter to your workbench.
2.Raise the handle and engage the pawl in one of the ratchet notches.
3.Place the sheet metal between the upper drive wheel and lower wheel (see Figure 2).
4.Pull the handle down with one hand as you feed the sheet metal with the other into the cutting wheel to begin shearing.
EYE INJURY HAZARD! |
Wear safety glasses during |
use of this tool! |
COPYRIGHT © JUNE, 2006 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#PC8328 PRINTED IN CHINA
