To attach the sanding belt:

1.Loosen the screw on the platen (Figure 4), press the wheel inward, and tighten the screw.

Figure 4. Loosening screw on platen.

2.Install the sanding belt as shown in Figure 5.

3.Remove pressure on the throttle lever to stop the sander.

4.When the sanding belt loses its effective- ness, disconnect the sander from air, remove the belt and replace with a new one.

Maintenance

Lubricate at the beginning of the sanding task. Place one or two drops of pneumatic tool oil directly into the air fitting as shown in Figure 7.

A filter/lubricator/regulator set up is not recom- mended, as excess oil in the tool could spray onto the workpiece.

Figure 5. Installing sanding belt.

3.Loosen the screw shown in Figure 4 to auto- matically tension the belt.

Operation

To operate the sander:

1.Plug the sander into compressed air.

2.Hold the sander and push the throttle lever (Figure 6) to operate the sander and adjust the speed. Turn the valve screw to set the maximum belt speed.

Valve

Screw

Throttle

Lever

Figure 6. Sander controls.

Figure 7. Lubricating directly into air fitting.

Also, apply one to two squirts of non-detergent motor oil, such as SAE 20W, into the oil ball shown in Figure 8.

Figure 8. Oil ball.

Run the sander for a few minutes to eject excess oil, then wipe the tool down with a rag and begin sanding. Oil the tool after use or storage.

If you need help with your new pneumatic tool, call our Tech Support at: (570) 546-9663.

Page 1 Page 3
Page 2
Image 2
Grizzly H0596 instruction sheet Maintenance, Operation, To attach the sanding belt, To operate the sander
Page 1 Page 3

H0596 specifications

Grizzly H0596 is a versatile and robust woodworking machine that holds a prominent place in the tool lineup of hobbyists and professionals alike. Known for its reliability and exceptional performance, the H0596 model is specifically designed for those who demand precision and efficiency in their woodworking projects.

One of the main features of the Grizzly H0596 is its powerful motor, which provides a significant amount of torque to handle various materials with ease. This machine is equipped with a heavy-duty construction that ensures stability and reduces vibrations during operation, leading to more accurate cuts. The H0596 also boasts a spacious working area, allowing users to work on larger projects without the need for constant repositioning.

Another noteworthy characteristic of the Grizzly H0596 is its user-friendly interface, which includes intuitive controls and easy adjustments. The machine features a well-designed fence system that can be quickly aligned, ensuring consistent results with every cut. The inclusion of an emergency stop button enhances safety, allowing users to halt operation immediately if required.

In terms of technology, the H0596 incorporates advanced dust collection capabilities, which help maintain a clean work environment and enhance visibility during operation. This feature is particularly valuable for indoor use, as it minimizes the mess associated with woodworking. The machine is compatible with standard dust collection systems, making it easy to integrate into any workshop setup.

Durability is a key characteristic of the Grizzly H0596. Constructed from high-quality materials, the machine is designed to withstand the rigors of daily use. Users can rely on its long-lasting performance without worrying about frequent maintenance or replacements.

The Grizzly H0596 is also known for its versatility, handling various woodworking tasks, including jointing, planing, and ripping. This flexibility makes it a valuable addition to any workshop, as it can adapt to the evolving needs of projects.

In summary, the Grizzly H0596 stands out due to its powerful motor, sturdy build, user-friendly design, advanced dust collection technology, and versatile capabilities. It is an excellent choice for any woodworker looking to enhance their operations and improve the quality of their work.
Top Page Image Contents