Other Related Information |
|
Base Length | |
Base Width | |
Quill Diameter | |
No. Of Dust Ports | 1 |
Dust Port Size | 2 in. |
Depth Stop Type | Threaded Rod with Positive Stop |
Column Diameter | 2 in. |
Spindle Information |
|
Spindle Taper | B16 |
Spindle Travel | |
Dist From Spindle To Column | |
Dist From Spindle To Table | 8 in. |
Dist From Spindle To Base | 11 in. |
Table Information |
|
Table Length | 7 in. |
Table Width | 7 in. |
Table Thickness | 3/4 in. |
Floor To Table Height | |
Vertical Table Movement | Crank Handle Operate |
Table Swing | 360 deg. |
Table Tilt | 90 deg. |
Table Swivel Around Center | 360 deg. |
Table Swivel Around Column | 360 deg. |
Maximum Movement Of Work Table | 10 in. |
No. Of T Slots | 4 |
T Slot Width | 5/8 in. |
T Slot Length | |
Operation Information |
|
Oscillating Stroke Length | 1/2 in. |
Swing | |
Drilling Capacity | 1/2 in. in Steel |
No Of Spindle Speeds | 5 |
Range Of Spindle Speeds | 620, 1100, 1720, 2340, 3100 RPM |
Drill Chuck Type | B16 Key Chuck |
Drill Chuck Size | 1/2 in. |
Other Specifications: |
|
Country Of Origin | China |
Warranty | 2 Year |
Serial Number Location | Data Label on Head |
Assembly Time | 30 minutes |
Features: |
|
Oscillating Spindle |
|
Dust Collection Fitting |
|
Sanding Drum Shaft |
|
1/2HP Motor |
|
5 Speeds |
|
1/32" - 1/2" Chuck |
|
Cushioned Grip Quill Handles |
|
Model H0625 | The information contained herein is deemed accurate as of 10/6/2008 and represents our most recent product specifications. | PAGE 2 OF 2 |
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. |