Recommended Tools |
|
Wrench/Socket 10mm | 1 |
Wrench/Socket 17mm | 1 |
Hammer | 1 |
Wood Block | 1 |
Clamp | 1 |
Assembly
1.Place the bottom shelf assembly upside down on a flat surface, then remove the pre- installed
2.Install the locking swivel casters on one end and the fixed casters on the other end onto the fixed hex bolts and secure with the fasteners removed in Step 1, as shown in
Figure 4.
Locking
Swivel
Caster
x 16
Fixed Caster
Figure 4. Casters installed.
3.Flip the bottom shelf assembly over and place the casters on a flat surface.
4.Remove the M12-1.75 x 30 hex bolts and flat washers from the handle ends.
5.Place the handles into the sockets at both ends of the bottom shelf. Make sure the horizontal supports face inward, as shown in
Figure 5.
| Horizontal |
Handle | Supports |
Figure 5. Handles correctly positioned.
6.Fasten the handles to the bottom shelf with the M12-1.75 x 30 hex bolts and flat washers (see Figure 6). Finger tighten the bolts for now.
x 4
