Changing Blades
To change the blades:
1.Make sure the tool is disconnected from the power supply.
2.Unscrew the three cap screws in the head of the shears and set them aside.
3.Remove the head assembly from the main body of the shear by pulling it forward (Figure 5).
Figure 5. Shear head removal.
4.Remove the middle blade and side blades from the housing. Keep the spacer bushing for re-assembly.
5.Sharpen or replace the blades.
6.Install the blades back into the hous- ing.
NoteÑ Reassemble the blades back into the housing the same way they were taken out. Make note of their orientation.
