OPERATIONS
Loading
When replacing nails in your Model H5527, follow these guidelines:
Gauge: 18
Length: 5⁄8" – 2"
Capacity: 100
To load your nailer:
1.DISCONNECT NAILER FROM THE AIR SUPPLY!
2.Grip the nailer firmly, and depress the magazine latch, as shown in Figure 3.
Figure 3. Releasing magazine latch.
3.Pull the magazine cover back until it stops.
4.Point the nailer down and insert a stick of brad nails into the magazine, as shown in Figure 4. Make sure that the pointed ends of the nails rest in the slot at the bottom of the magazine.
Figure 4. Loading nails into magazine.
5.Push the magazine cover forward until the magazine latch locks in place.
H5527 18 Gauge Brad Nailer |
