MODEL H5530 |
5 PC. AIR TOOL KIT |
This 5 Pc. Air Tool Kit contains a paint spray gun, a blow gun, a tire inflator with pressure gauge, a cleaning gun, and an air hose.
Using the Spray Gun
1.Attach the paint reservoir onto the spray gun and attach the air hose.
2.Adjust the air pressure regulator on the compressor to 30 PSI.
3.Identify the spray gun controls in Figure 1 and adjust in the following order:
A.Fluid
B.Pattern
C.Nozzle
Nozzle |
|
Control |
|
| Fluid |
| Control |
Pattern | Paint |
Reservoir | |
Control |
|
Figure 1. Spray gun controls.
4.Hold the sprayer
5.Maintain the spray gun by doing the following:
A.Clean the spray gun after each use by spraying a small amount of thinner. DO NOT immerse the spray gun in the thinner.
B.Use a soft bristle brush soaked with thinner when cleaning inside the spray gun.
C.Trigger, control valves, and springs should be lubricated periodically.
EXPLOSION HAZARD! Do not spray flammable fluids near an open flame or ignition source.
RESPIRATORY HAZARD! Always wear a respirator rated for paint and solvent vapors when operating the Paint Spray Gun.
ALWAYS wear eye protection while using air tools. Fluid or debris may be propelled into the air causing serious personal injury.
ONLINE MANUAL DISCLAIMER
THE INFORMATION IN THIS MANUAL REPRESENTS THE CONFIGURATION OF THE MACHINE AS IT IS CURRENTLY BEING SHIPPED. THE MACHINE CONFIGURATION CAN CHANGE AS PRODUCT IMPROVEMENTS ARE INCORPORATED. IF YOU OWN AN EARLIER VERSION OF THE MACHINE, THIS MANUAL MAY NOT EXACTLY DEPICT YOUR MACHINE. CONTACT CUSTOMER SERVICE IF YOU HAVE ANY QUESTIONS ABOUT DIFFERENCES. PREVIOUS VERSIONS ARE NOT AVAILABLE ONLINE.