Grizzly H5844 Measuring Distances, Storing & Recalling Measurements, Addition/Subtraction

MEASURING DISTANCES

The range finder measures from the back end of its case to the object at which it is pointed (see illustration on previous page).

To take a measurement, position the back end of the range finder against the starting point and press the MEASURE button.

MEASURE

The range finder will beep once to acknowledge the button was pressed, then beep twice and display the measurement. Note—The range finder works best when measuring surfaces at least 113⁄4" (30 cm) wide.

STORING & RECALLING

MEASUREMENTS

The range finder can store and recall measurements for the purpose of making calculations.

To store a measurement, take the measurement, press the STORE button, then press one of the M# buttons (M1, M2, M3).

MEASURESTOREM#

To recall a stored number, press the M# button that corresponds to the stored measurement you want to recall.

M#

ADDITION/SUBTRACTION

The range finder can add or subtract measurements that are stored in the memory with currently displayed measurements or other stored measurements.

To add (or subtract) two stored measurements, recall the first measurement by pressing the appropriate M# button, then press the “+” (or “-”) button, then recall the next measurement by pressing the other appropriate M# button, then press the “+” (or “-”) key to show the total of the added (subtracted) measurements.

M# + M# +

M# – M# –

CALCULATING AREA

The range finder multiplies two stored measurements to quickly calculate the square feet or square meters of a given area.

To determine the area, store the length and width in any of the three M# buttons. Press the AREA button, then press the two M# buttons where the length and width are stored.

AREA M# M#

CALCULATING VOLUME

The range finder multiplies three stored measurements to quickly calculate a given volume.

To calculate the volume, store the length, height, and width in all three of the M# buttons. Press the VOL (volume) button and the range finder will automatically calculate the volume from the three measurements stored in the M# buttons.

VOL

CLEARING DISPLAY & CLEARING STORED MEASUREMENTS

The ALL MEMORY CLEAR button has two functions, depending on how long the button is pressed.

ALL

MEMORY

CLEAR

To clear the display, press the ALL MEMORY CLEAR button briefly.

To clear all stored measurements from the memory, press and hold the ALL MEMORY CLEAR button for five seconds.

If you need additional help with this item, call our service department at: (570) 546-9663.