MODEL H6139 |
1⁄2" REVERSIBLE AIR |
DRILL |
INSTRUCTION SHEET |
EYE INJURY HAZARD!
Always wear safety glasses
when using this tool to prevent serious personal
INJURY HAZARD!
Always disconnect tool from
air to prevent unexpected 
operation during service.
EXPLOSION HAZARD!
Never exceed 120 PSI.
Introduction
Features include a pistol grip with trigger switch, forward and reverse switch and 1⁄4" NPT female air inlet. The 1⁄2" chuck accepts drill bits down to 1⁄64" and includes a chuck key. The auxiliary handle can be positioned anywhere around the drill body.
Figure 1. Model H6139.
Quick | Quick | Lubricator | |
Connector | Connector | Regulator | |
Your |
|
| Air |
Tool |
|
| Compressor |
Quick |
|
|
|
Coupler |
| Quick |
|
| Air Hose | Filter | |
| Coupler | ||
|
| ||
Inventory |
| |
A. | Air Drill | 1 |
B. | 1⁄4" NPT Quick Connect Fitting (male) | 1 |
C. | Chuck Key | 1 |
D. | Handle | 1 |
E. | Lock Collar | 1 |
Operation
Tool requires 90 PSI to operate correctly.
To improve tool lifespan, use a filter/lubricator/ regulator as shown in Figure 2. Otherwise, lubri- cate daily with a couple drops of pneumatic tool oil directly into the air fitting as shown in Figure 3.
Figure 2. Installing your tool.
Figure 3. Lubricating directly into air fitting.
If you need help with your new pneumatic tool, call our Tech Support at: (570)
COPYRIGHT © FEBRUARY, 2006 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#KM7955 PRINTED IN CHINA
