Grizzly H6441 specifications Replacing Bulb

Replacing Bulb

1.Turn the lamp OFF, unplug it from the power source, then allow it to cool.

2.Remove the three Phillips head screws from the lens retainer, then remove the retainer (see Figure 2).

Retainer Lens

Seal

Reflector Bulb

Figure 2. Lamp parts removed for bulb

replacement.

3.While observing how the reflector and lens fit into the lamp cavity, carefully remove them from the lamp.

-2-

4.Use clean gloves or a cloth to pull the bulb from its receptacle and replace it with a new one.

Note: Handling a halogen bulb with your hands exposes the exterior quartz of the bulb to oils and salts that could cause a weak point and decrease the life of the bulb.

5.Make sure the reflector seal is positioned cor- rectly on the reflector lip, then re-insert the reflector back into the lamp cavity.

6.Insert the lens on top of the reflector, then secure them in place by re-installing the lens retainer with the screws removed in Step 2.

Like all high intensity lamps there is potential danger when operating this lamp. Accidents are frequently caused by lack of familiarity or failure to pay attention. Use this lamp with respect and caution to decrease the risk of operator injury. If normal safety pre- cautions are overlooked or ignored, serious personal injury may occur.

If you need help with your new halogen lamp, call our Tech Support at: (570) 546-9663.

H6441 Halogen Lamp