MODEL H7585 |
RESAW FENCE |
FOR G0513 |
INSTRUCTION SHEET |
Introduction |
Installing the new fence requires replacing the original fence with the new fence support tube on the fence base, attaching the resaw fence, then putting on the new fence scale.
Inventory |
| |
• | Resaw Fence | 1 |
• | Fence Support Tube | 1 |
• | Flat Washer 8mm | 1 |
• | Moving Plate | 1 |
• | Adjustment Handle | 1 |
• | Scale | 1 |
• Cap Screws | 4 | |
Figure 1. Four cap screws to be removed for
changing fences.
Installing Fence Support Tube
1.Remove the four cap screws (Figure 1) and remove the fence from your original fence base.
2.Install the fence support tube on the fence base with the spacer plate between the them, as shown in Figure 2.
Attaching Resaw Fence
1.Insert the adjustment handle with washer through the hole in the fence and attach the moving plate on the other side (Figure 3).
2.Slide the resaw fence over the moving plate, center it with your original fence, and lock it in position with the adjustment handle.
Installing Scale
1.Raise the blade guides, and place the resaw fence against the blade.
2.Note where scale indicator line is over the old scale, and pencil a mark on the rail next to the scale.
3.Remove the old scale and install the new scale so the 0 is even with your pencil mark.
Spacer Plate
Between Fence
Support Tube and
Fence Base
