SECTION 3: SET UP
Unpacking
Some metal parts may have sharp edges on them after they are formed. Please examine the edges of all metal parts before handling them. Failure to do so could result in injury.
The Model H7760 is shipped from the manufac- turer in a carefully packed carton. If you discover the machine is damaged after you have signed for delivery, please immediately call Customer
Service at (570) 546-9663 for advice.
Save the containers and all packing materials for possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the con- dition of your shipment, you should inventory the contents.
Inventory
After all the parts have been removed from the carton, you should have the parts shown in Figure 4:
Inventory | Qty | |
A. | Spark Guard | 1 |
B. | Wheel Dressing Tool | 1 |
C. | Eye Shield & Bracket | 1 |
D. | Tool Rests | 2 |
E. | Grinder/Sander Unit | 1 |
F. | Hardware Bag | 1 |
| 2 | |
| 2 | |
| 2 | |
| 1 | |
| 1 | |
| 1 | |
|
| F |
| A |
|
NOTICE
A full parts list and breakdown can be found toward the end of this manual. For easier
B
D
E
assembly, or to identify specific parts, please refer to the detailed illustrations at the end of the manual.
C
