| MODEL H7779 |
| JERKY SLICER |
| INSTRUCTION SHEET |
Inventory (Figure 1) | Disassembly for Cleaning |
A. | Jerky Slicer | 1 |
B. | Handle | 1 |
C. | Thumbscrew for Handle | 1 |
D. | Clamps | 2 |
E. | Meat Alignment Combs | 2 |
You must disassemble the jerky slicer as shown in Figure 2 to clean all individual components thoroughly. Disassembly requires a 5mm hex wrench to remove the top half of the jerky slicer.
You MUST clean, thoroughly rinse, and sani- tize all components of this product BEFORE and BETWEEN uses. Failure to follow this warning may lead to sickness or death!
A
B C
D
E
Figure 1. Model H7779 inventory.
NOTICE
The Model H7779 is NOT dishwasher safe!
Figure 2. Required level of disassembly for
proper cleaning of all components.
When removing the crank arm shaft, be aware that the end is spring loaded (see Figure 3).
This End Spring Loaded
Figure 3. Overhead view of blade shafts.
COPYRIGHT © NOVEMBER, 2005 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TR7699 PRINTED IN CHINA
