INTRODUCTION
Foreword |
| Model H7995 |
| Specifications | |
|
| |
|
|
|
|
|
|
We are proud to offer the Grizzly Model H7945/H7946/H7995 26° Angle Nailer. This nailer is part of a growing Grizzly family of fine pneumatic tools. When used according to the guidelines in this manual, you can expect years of
The specifications and photographs in this manual represent Models H7945/H7946/ H7995 as supplied when this manual was prepared. However, owing to Grizzly’s pol- icy of continuous improvement, changes may be made at any time with no obliga- tion on the part of Grizzly.
Model H7945
Specifications
Nail Type | 18 Gauge @ 26° |
Nail Length | |
Magazine Capacity | 128 Nails |
Weight | 3.0 lbs. |
Air Inlet | 1/4" NPT. |
Operating Pressure |
Model H7946
Specifications
Nail Type | 15 Gauge @ 26° |
Nail Length | |
Magazine Capacity | 86 Nails |
Weight | 3.0 lbs. |
Air Inlet | 1/4" NPT. |
Operating Pressure | |
|
Nail Type | 16 Gauge @ 26° |
Nail Length | |
Magazine Capacity | 100 Nails |
Weight | 3.0 lbs. |
Air Inlet | 1/4" NPT. |
Operating Pressure |
Contact Info
If you have any comments regarding this manual, please write to us at the following address:
Grizzly Industrial, Inc.
C/O Technical Documentation Manager
P.O. Box 2069
Bellingham, WA
Most importantly, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570)
Fax: (800)
Web Site: http://www.grizzly.com
H7945/H7946/H7995 26° Angle Nailer
