Unloading Nails
To remove unused nails:
1.DISCONNECT NAILER FROM THE AIR SUPPLY!
2.Point the nailer away from you and all bystanders.
3.Open the magazine cover (as shown on Page 8) and lift the nails from maga- zine.
4.Close the magazine cover to keep the magazine assembly clean until the nailer is reloaded.
Rotating Exhaust
Cover
The exhaust cover rotates as needed to direct the exhaust away from you.
To rotate the exhaust cover:
1.Use the 4mm hex wrench to loosen the exhaust cover cap screw as shown in Figure 10.
Exhaust
Cap Screw
Figure 10. Loosening the exhaust cap
screw.
2.Rotate the exhaust cover by hand to aim the exhaust port in the desired direction.
3.Tighten the exhaust cover cap screw.
H7949/H7950/H7951 Nailer |
