Model H8095 |
1500 LB |
Steel ATV Jack |
Operation |
Failure to follow these instructions could | Pump Handle (Figure 1): To raise the jack, rotate |
the pump handle clockwise completely, then move | |
result in serious personal injury or death: | the pump handle up and down. To lower the jack, |
| slowly rotate the pump handle counterclockwise. |
1.DO NOT overload this jack beyond its
| rated capacity. Overloading can cause | Lock Release Pedal (Figure 1): This jack fea- |
| the jack to collapse and drop the load. | tures a stepped lock system that prevents loads |
2. | ALWAYS support the vehicle with appro- | placed on the jack from accidentally dropping. |
| priately rated support stands before | When pushed down, the lock release pedal allows |
| working under it. | the operator to completely lower the jack and |
3. | DO NOT attempt to move the vehicle | bypass the stepped lock system. |
| while the jack is in use. |
|
4. | Use only on hard level surfaces like | Note: The lock pedal will not release if the load |
| concrete or asphalt. Other surfaces are | binds against the stepped plate. To remove a |
| potentially unstable. | bind, jack the load one or two pumps. |
5.Center the load on the jack to maintain
proper balance and stability. |
|
|
|
|
|
| |
| Pump |
| |
6. DO NOT use jack if it begins leaking |
|
| |
fluid or if it slowly sinks with a heavy |
| Handle |
|
load. These are indications that the jack |
|
|
|
needs to be immediately serviced. |
|
|
|
Specifications |
|
|
|
|
|
Maximum Lifting Capacity | 1,500 | Lbs. |
|
|
|
Lifting Range |
|
|
| ||
| Lock |
| |||
Weight | 78 | Lbs. |
| Release |
|
|
|
|
| Pedal |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Figure 1. Jack controls. | ||
|
|
| If you need help with the Model H8095, call our | ||
|
|
| Technical Support line at: (570) | ||
COPYRIGHT © DECEMBER, 2006 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TR8826 PRINTED IN CHINA
