INTRODUCTION
ForewordSpecifications
The specifications, details, and photographs in this manual represent the Model H8208 as supplied when the manual was prepared. However, owing to Grizzly’s policy of continuous improvement, changes may be made at any time with no obligation on the part of Grizzly.
If you have any comments regarding this manual, please write to us at the following address:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA
Most importantly, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570)
Fax: (800)
Web Site: http://www.grizzly.com
Air Ratchet
Drive Size | 3⁄8" |
No Load Speed | 160 RPM |
Max. Torque | 50 ft/lb (68N.m) |
Air Inlet | 1⁄4" |
Air Hose ID | 3⁄8" |
Operating Air Pressure | 90 PSI |
Min. Required Air Flow | 4 CFM |
Max. Sound Level | 103 dB |
Weight | 2.4 lbs |
Impact Wrench
Drive Size | 1⁄2" |
No Load Speed | 7000 RPM |
Max. Torque | 230 ft/lb (310N.m) |
Air Inlet | 1⁄4" |
Air Hose ID | 3⁄8" |
Operating Air Pressure | 90 PSI |
Min. Required Air Flow | 8 CFM |
Max. Sound Level | 104 dB |
Weight | 4.8 lbs |
Air Hammer
Chisel Shank OD | 10mm |
Bore Diameter | 3⁄4" |
Blows Per Min | 4500 |
Air Inlet | 1⁄4" |
Air Hose ID | 3⁄8" |
Operating Air Pressure | 90 PSI |
Min. Required Air Flow | 3 CFM |
Max. Sound Level | 108 dB |
Weight | 2.9 lbs |
Model H8208 |
