![MODEL H8239](/images/new-backgrounds/39854/398541x1.webp)
MODEL H8239 |
SAFETY LOCKING ON/OFF |
SWITCH |
INSTRUCTIONS |
For questions or help with this product contact Tech Support at (570) |
To reduce risk of serious burns, electrocu- tion or death when installing this switch:
•Only use this switch to replace an existing machine switch that has the same physi- cal configuration and equivalent electrical specifications/ratings.
•Installation must only be performed by an electrician or qualified service personnel, and all applicable electrical codes must be adhered to.
•Turn off and completely disconnect all power sources to the machine before installing the switch.
•Do not use this switch in wet or damp locations, or near explosive fumes or flammable liquids. It is not sealed or rated for these environments.
•Make sure there is a verified machine ground on the circuit this switch is installed.
Safety
Key
Figure 1. H8239 safety paddle switch.
Introduction
The Model H8239 features a large ON/OFF pad- dle with a removable safety key that can be used to disable the switch. This switch is designed to fit into 7⁄8" x 1 5⁄8" rectangular hole or mounted over a 1 1⁄8" x 2 1⁄4" rectangular hole with four #5 screws.
Specifications
Rated Horsepower | 2HP |
Rated Voltage | 125V/250V |
Rated Current Amperage | 20A |
Copyright © APRIL, 2011 By Grizzly Industrial, Inc.
Warning: No portion of this INSTRUCTION SHEET may be reproduced in any shape Or form without the written approval of Grizzly Industrial, inc.
#TS13931 printed in CHINA