MODEL H8246 |
WIDE SINGLE MINI |
ON/OFF SWITCH |
INSTRUCTIONS |
For questions or help with this product contact Tech Support at (570) |
To reduce risk of serious burns, electrocu- tion or death when installing this switch:
•Only use this switch to replace an exist- ing component switch that has the same physical configuration and equivalent electrical specifications/ratings.
•Installation must only be performed by an electrician or qualified service personnel, and all applicable electrical codes must be adhered to.
•Turn off and completely disconnect all power sources to the component before installing the switch.
•Only install this switch on the "hot" wires.
Do not install it on the neutral or ground wires. Otherwise, the component could still be receiving live current even when the switch is turned OFF.
•Do not use this switch in wet or damp locations, or near explosive fumes or flammable liquids. It is not sealed or rated for these environments.
•Make sure there is a verified compo- nent ground on the circuit this switch is installed.
Figure 1. Model H8246.
Introduction
The Model H8246 features a wide single ON/OFF toggle switch and fits into a 3⁄4" x 7⁄8" rectangular hole.
Specifications
Rated Voltage | 125V/250V |
Rated Current | 6A |
Copyright © APRIL, 2011 By Grizzly Industrial, Inc.
Warning: No portion of this INSTRUCTION SHEET may be reproduced in any shape Or form without the written approval of Grizzly Industrial, inc.
#TS13926 printed in CHINA
