Grizzly M2NPV-VM specifications Product Dimensions, Shipping Dimensions, Electrical, Motors, Main

MACHINE DATA

SHEET

Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901

MODEL G0624 10" CAST IRON BENCH TOP WOOD LATHE

Product Dimensions:
Weight	89 lbs.
Length/Width/Height	34 x 8-3/4 x 15 in.
Foot Print (Length/Width)	33 x 8-3/4 in.
Shipping Dimensions:
Type	Cardboard
Content	Machine
Weight	102 lbs.
Length/Width/Height	37 x 12 x 18 in.
Electrical:
Switch	Paddle Type w/ Lockout Key
Switch Voltage	110V
Cord Length	8.2 ft.
Cord Gauge	18 gauge
Minimum Circuit Size	15 amp
Plug Included	Yes
Motors:
Main
Type	Capacitor Start
Horsepower	1/2 HP
Voltage	110V
Prewired	110V
Phase	Single
Amps	6A
Speed	1725 RPM
Cycle	60 Hz
Number Of Speeds	1
Power Transfer	Belt Drive
Bearings	Shielded and Lubricated
Main Specifications:
Operation Information
Swing Over Bed	10 in.
Dist Between Centers	15-1/2 in.
Swing Over Tool Rest	7-1/2 in.
No Of Spindle Speeds	6
Range Of Spindle Speeds	480, 1270, 1960, 2730, 3327, 4023 RPM
Floor To Center Height	13-5/32 in.
Spindle Information
Spindle Type	Right Hand
Spindle Taper	MT#2
Spindle Size	1 in.
Spindle Bore	23/64 in.
Spindle Center	Spur
Spindle TPI	8

Model G0624	The information contained herein is deemed accurate as of 10/7/2008 and represents our most recent product specifications.	PAGE 1 OF 2
	Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.